OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: Kent TK7 penetrator load  (Read 5746 times)

Offline BINK McCARTY

  • The Boss Gobbler
  • ****
  • Posts: 831
  • Beak first in th' dirt...
Kent TK7 penetrator load
« on: January 26, 2020, 04:32:01 AM »
Anyone tried this load yet? It's loaded with the 15g/cc  #7 shot.

Offline jordanz7935

  • The Boss Gobbler
  • ****
  • Posts: 764
Re: Kent TK7 penetrator load
« Reply #1 on: January 26, 2020, 11:01:46 AM »
There was a post about them on one of the fb groups im in.Very unimpressive from what I saw. Too bad because I was hoping they would be as good or better than my beloved Fed HW's. But from what I've seen of the price and patterns of the Kent loads, I'll be switching to tss in my 20s when I run out of HW's

Offline BINK McCARTY

  • The Boss Gobbler
  • ****
  • Posts: 831
  • Beak first in th' dirt...
Re: Kent TK7 penetrator load
« Reply #2 on: January 27, 2020, 05:06:53 PM »
Well,if you don't wanna run out I have quite a bit of the 20 gauge 3"-1.5 oz.#7 shot if you're interested.

Offline savduck

  • Limbhanger
  • ******
  • Posts: 4318
Re: Kent TK7 penetrator load
« Reply #3 on: January 28, 2020, 09:03:15 PM »
I posted up last year about them. Two or three guys bought them. They were getting heavyweight type patterns. No better no worse.
Georgia Boy

Mike13

  • Guest
Re: Kent TK7 penetrator load
« Reply #4 on: February 14, 2020, 04:32:53 PM »
I posted up last year about them. Two or three guys bought them. They were getting heavyweight type patterns. No better no worse.

Do you recall what guns they were shot through?

Offline savduck

  • Limbhanger
  • ******
  • Posts: 4318
Re: Kent TK7 penetrator load
« Reply #5 on: February 14, 2020, 09:02:57 PM »
No. Dont remember
Georgia Boy

Offline squidd

  • Hero Member
  • ***
  • Posts: 365
  • God, Family and Country
Re: Kent TK7 penetrator load
« Reply #6 on: March 01, 2020, 08:51:27 AM »
I shot one round with a Carlson’s .585 choke at 40-yds - not good and will need to find a different choke before squeezing $5 each time.

Offline Mike13

  • Full Member
  • *
  • Posts: 35
Re: Kent TK7 penetrator load
« Reply #7 on: March 03, 2020, 01:39:31 PM »
What gun did you shoot it through? Looking for my next load for an Affinity.

I shot one round with a Carlson’s .585 choke at 40-yds - not good and will need to find a different choke before squeezing $5 each time.

Offline squidd

  • Hero Member
  • ***
  • Posts: 365
  • God, Family and Country
Re: Kent TK7 penetrator load
« Reply #8 on: March 03, 2020, 09:43:29 PM »
Win SX2 w/ 26” barrel

Offline turkeykiller41

  • Sr. Member
  • **
  • Posts: 131
Re: Kent TK7 penetrator load
« Reply #9 on: April 19, 2020, 12:45:22 AM »
Has anyone tried these loads in 870 youth,my stash of hw 7s is getting low.

Offline BINK McCARTY

  • The Boss Gobbler
  • ****
  • Posts: 831
  • Beak first in th' dirt...
Re: Kent TK7 penetrator load
« Reply #10 on: April 19, 2020, 04:27:21 AM »
Roger's has a good price on them right now.

Offline TrackeySauresRex

  • 2024 SITE SUPPORTER
  • Limbhanger
  • ********
  • Posts: 4850
Re: Kent TK7 penetrator load
« Reply #11 on: April 19, 2020, 04:30:53 PM »
Roger's has a good price on them right now.

Good price.. Not a patter to be found here on OG. I’d like to know how they pattern as well.
"If You Call Them,They Will Come."


Offline bushwhacker

  • Sr. Member
  • **
  • Posts: 153
Re: Kent TK7 penetrator load
« Reply #12 on: March 07, 2021, 01:53:28 PM »
Shot some of these yesterday in 870 21” barrel. Carlsons .575 and long beard .568 were best patterns. Nothing like TSS 9’s but very comparable to heavyweight 7’s. I have eight boxes of these and ten boxes of heavyweight 7’s. Much cheaper and perfect for my type of hunting

Offline turkeykiller41

  • Sr. Member
  • **
  • Posts: 131
Re: Kent TK7 penetrator load
« Reply #13 on: March 07, 2021, 04:59:27 PM »
If you don't mind me asking what was your numbers at 40.

Offline bushwhacker

  • Sr. Member
  • **
  • Posts: 153
Re: Kent TK7 penetrator load
« Reply #14 on: March 08, 2021, 06:02:16 AM »
To be honest I didn’t count. Kept the paper so I’ll get you a number. Going to change barrels and see what I come up with. My stock 26” barrel used to do 160-170 with the heavyweight 7’s and this shorter barrel does not shoot as well as the longer barrel so I’m going to see if these loads do the same. But just as a guess I’m going to say they did 120-130 in the 10. I’ll let you know.