registration is free , easy and welcomed !!!
Started by WNCTracker, February 25, 2017, 10:13:10 AM
Quote from: Fullfan on February 25, 2017, 11:18:09 AMShoot it without the scope and see what the results are
Quote from: Tail Feathers on February 25, 2017, 11:37:16 AMIs the barrel cap screwed on tight? Just about has to be that or the scope.
Quote from: 1iagobblergetter on February 25, 2017, 11:39:41 AMQuote from: Fullfan on February 25, 2017, 11:18:09 AMShoot it without the scope and see what the results arex2
Quote from: bbcoach on February 25, 2017, 12:15:12 PM1. Check the barrel nut and make sure it is hand tight then tighten it a couple of clicks with a pair of channel locs2. Check the IC choke very carefully to see if there are any cracks or broken slots and it is snug in the new barrel3. Make sure the IC choke is fitting properly in the new barrel with a good light4. Clean and polish the new barrel and reshoot if you don't get good patterns then4. Remove the scope and shoot it to see if POA/POI are fairly consistent from shot to shot This should tell you what is going on
Quote from: Greg Massey on February 25, 2017, 11:53:58 AMIs the Indian Creek choke a ported choke, is this choke the only one you have ? I would try a different choke, one that's non - ported.... I've never heard much good about Indian Creek chokes.. What is the dia. of the Indian Creek... You can't say for sure it's the red dot.. I'm thinking choke?
Quote from: Gumby on February 25, 2017, 11:34:57 AMIt's the red dot. I know people like that model but had one go bad on me this year after two years of use