Striker question

[thuber]

Does anyone in this group make weather proof strikers from aluminum arrows? I have a lot of aluminum arrows I'd like to repurpose.


Sent from my iPhone using Tapatalk

[mastevt]

I havent.  But I do make ones from Carbon arrows.

[Greg Massey]

Guy who makes Tru Tone wet ones in pot calls , make aluminum shaft striker to play on his calls , he will play the call with water running over the call with aluminum piece of arrow shaft ..

[BigSlam51]

Matt McClain makes a striker using a easton fmj shaft.

Sent from my SM-N975U using Tapatalk

[Southerngobbler]

a length of aluminum shaft with a homemade J B weld tip plays pretty good an a lot of surfaces for a water proof striker.

[thuber]

a length of aluminum shaft with a homemade J B weld tip plays pretty good an a lot of surfaces for a water proof striker.

Do you know what folks use for a tip?


Sent from my iPhone using Tapatalk

[Southerngobbler]

J B weld

[Greg Massey]

a length of aluminum shaft with a homemade J B weld tip plays pretty good an a lot of surfaces for a water proof striker.

Do you know what folks use for a tip?


Sent from my iPhone using Tapatalk

The one that i have just uses the aluminum shaft , no other tips ...

[JLH]

I heard that JLH guy is working on one....?

[Josh_Alloy_Calls]

I have always wanted to explore that more.
Every time I see the pile of drops near an arrow saw, I want to make a few.
The times I have tried it I got varying results.   That was fairly early in my call making journey, so it is very possible I made some other mistake that affected the sound.

Maybe I will order a few dozen bare shafts and cut them up!!  LOL
Or I could just dig through my pile of old arrows that I have accidentally shot into the occasional shoulder. 

[owego]

I use them & will buy all the 2018,2016 or 2013 you have. That is the only size i am interested in.

[thuber]

I use them & will buy all the 2018,2016 or 2013 you have. That is the only size i am interested in.

I will check the ones that I have and let you know. I would like to have couple of strikers made. I have a couple dozen new arrows...


Sent from my iPhone using Tapatalk

[owego]

I was the 1st one to come up with that striker in 1998 & 1st let it out at the Harrisburg show. Also the 1st to come up with a laminated striker , the same yr, at Harrisburg. http://www.enticerturkeycalls.com/shop/strikers/516-wet-one-striker/  CK them out.

[thuber]

I was the 1st one to come up with that striker in 1998 & 1st let it out at the Harrisburg show. Also the 1st to come up with a laminated striker , the same yr, at Harrisburg. http://www.enticerturkeycalls.com/shop/strikers/516-wet-one-striker/  CK them out.

Sent from my iPhone using Tapatalk

[muddpuppi]

I make a two piece alum striker but use solid stock...havnt tried an arrow