OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Opinion on federal heavyweight pattern

Started by Borden811, April 12, 2020, 04:58:22 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Borden811

April 12, 2020, 04:58:22 AM
Shot this from my 12ga 870, 21" barrel at 42 yards. 3" 1 5/8 Federal heavyweight #7 out of a Carlson's .640 TSS choke. Would you try and improve it, or hunt it the way it is?

https://imgur.com/gallery/gz0koZe

1iagobblergetter

#1
April 12, 2020, 09:53:57 AM
I would hunt it.

turkey_picker

#2
April 12, 2020, 10:26:33 PM
I would adjust my aim up about 2 inches and hunt with it.

BINK McCARTY

#3
April 14, 2020, 09:16:33 AM
That's about as good of a Heavyweight pattern I've seen in 12 gauge. No Benelli?

Borden811

#4
April 14, 2020, 10:57:30 AM
I still have all 3 benellis, I just got bored during the quarantine and needed something to do. So I started piecing together an 870. It involved hacksaws, steel putty, dremels, and paint by the time it was all said and done, but I'm happy with how it turned out. Still losing my mind up here in PA because the season doesn't start for 3 more weeks ????

Tom007

#5
April 15, 2020, 04:34:04 PM
How about a pic of that new slayer..... :turkey2:

BINK McCARTY

#6
April 19, 2020, 04:43:04 AM
Quote from: Tom007 on April 15, 2020, 04:34:04 PM
How about a pic of that new slayer..... :turkey2:

YES!!!! We need pics of your Franken-Remmy!!!

Borden811

#7
April 19, 2020, 07:16:58 AM
Ok,ok! I did a little write up over in the turkey gun section on my 870 project. Hopefully I can get to the range and try one more tube out of it today with the heavyweight 7s. Then I'll be set for our season which opens in two weeks.

huntinsomd

#8
April 19, 2020, 09:30:53 AM
Pattern looks great. Maybe a couple inches low. If that's the case aim a little higher and you are golden!

WorkingBirds

#9
April 20, 2020, 10:38:28 AM
Quote from: turkey_picker on April 12, 2020, 10:26:33 PM
I would adjust my aim up about 2 inches and hunt with it.

:agreed:

Borden811

#10
April 20, 2020, 10:46:27 AM
Quote from: WorkingBirds on April 20, 2020, 10:38:28 AM
Quote from: turkey_picker on April 12, 2020, 10:26:33 PM
I would adjust my aim up about 2 inches and hunt with it.

:agreed:

I realize that. That was shot during a patterning session, with about 6 different chokes, and 5 different types of shells. My aim was dead center of the target, which happens to be exactly where the poi is for that choke load combo. Obviously now that I know that, and repeated it several times, I know where to aim with that choke load combo. My question was more to the actual pattern itself, and the density and evenness of it, not the actual location of it on the target. That being said, I do appreciate the feedback!

BINK McCARTY

#11
April 22, 2020, 03:42:41 AM
Quote from: Borden811 on April 20, 2020, 10:46:27 AM
Quote from: WorkingBirds on April 20, 2020, 10:38:28 AM
Quote from: turkey_picker on April 12, 2020, 10:26:33 PM
I would adjust my aim up about 2 inches and hunt with it.

:agreed:

I realize that. That was shot during a patterning session, with about 6 different chokes, and 5 different types of shells. My aim was dead center of the target, which happens to be exactly where the poi is for that choke load combo. Obviously now that I know that, and repeated it several times, I know where to aim with that choke load combo. My question was more to the actual pattern itself, and the density and evenness of it, not the actual location of it on the target. That being said, I do appreciate the feedback!

We DO think alot alike when it comes to testing!!!
Print
Go Up Pages1
User actions