Hand loaders ?

[wchadw]

All

I do a couple of different hand loads of TSS. Most call for Lil Gun powder. I have noticed after shooting these loads that my barrel is super dirty. Not sure if it's unburnt powder? Or if this powder just burns dirty like some black powders?
Anyone know?


Sent from my iPhone using Tapatalk

[dirt road ninja]

mine is pretty dirty after any turkey load, factory or handloads. Hevi-13 was the worst.

[davisd9]

Powder could be some of it, but those heavy plastic wads leave a lot of plastic behind as well.

[Chad]

I've noticed how dirty my barrel gets with Lil Gun also. Maybe the burn rate of Little Gun is a bit slow for the 20 gauge?? I havent shot anything but Lil Gun for 20 gauge turkey loads, so I cant compare it to anything else.

[mtns2hunt]

I beleave it is a little dirtier than than what I get from normal lead loads. However I've found it cleans up well and patterns are very good. I do not beleave in polishing a barrel but a bit more cleaning periodically may be indicated,

[Reloader]

It depends a lot on the individual load.  I don't find LG to be more dirty than others in a similar burn range, but all of them will vary from load to load.  I also find it seems less powder fouling is left in a bore that's been polished and at a minimum snaked between shots.

[BandedSpur]

Any and all of the slow burners (Blue Dot, Lil Gun, 296, 2400, etc.) leave a lot of fouling in the barrel. That is the price of doing business with heavy loads. Those loads require heavy charges of slow burning powders to keep pressures in check. A lot of the residue you are seeing is the burning deterrents the powder is coated with to make them slow burning plus the fact that slow burners require heavier charges compared to lighter loads that can safely utilize faster burning powders. Those powders do not require the burning deterrents that the slower burning powders do. A 45 grain charge of Lil Gun is always going to produce a lot more residue than an 18 grain charge of Red Dot in a typical target load.

[mtns2hunt]

Any and all of the slow burners (Blue Dot, Lil Gun, 296, 2400, etc.) leave a lot of fouling in the barrel. That is the price of doing business with heavy loads. Those loads require heavy charges of slow burning powders to keep pressures in check. A lot of the residue you are seeing is the burning deterrents the powder is coated with to make them slow burning plus the fact that slow burners require heavier charges compared to lighter loads that can safely utilize faster burning powders. Those powders do not require the burning deterrents that the slower burning powders do. A 45 grain charge of Lil Gun is always going to produce a lot more residue than an 18 grain charge of Red Dot in a typical target load.

This seems to be a well thought out answer. Thanks for the info!