OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

Slop in Picatinny rail

Started by chaz_z71, May 05, 2018, 06:51:25 PM

Previous topic - Next topic

chaz_z71

Hey guys. I bought a vortex venom and a egw rail for my sbe2. I notice slop in the recoil lugs front to back. I've read that a weaver rail will not have slop but I like the fact that the egw sets the sight a little higher. Is the slop ok? Or will it jar loose? Thanks

sixbird

I wouldn't want any slop. Just stands to reason that it'll move. Maybe you could shim it. I suppose soda can aluminum would work or maybe shim material from somebody like Brownell's.

mightyjoeyoung

By "slop", do you mean you can wiggle the sight back and forth a little bit or do you mean it feels like it could jump off the mount if you shot it?  Because tolerances between sights, mounts and bases all can differ, you SHOULD have some slight movement.  Just keep the sight pushed forward against the rail cuts (rearward recoil) and tighten her down. 
Big Al's "Take-em" Style Silhouette decoys Pro-Staff.

Of all the things I've lost, I miss my mind te most.



turkey_picker

Quote from: mightyjoeyoung on May 10, 2018, 01:03:18 PM
By "slop", do you mean you can wiggle the sight back and forth a little bit or do you mean it feels like it could jump off the mount if you shot it?  Because tolerances between sights, mounts and bases all can differ, you SHOULD have some slight movement.  Just keep the sight pushed forward against the rail cuts (rearward recoil) and tighten her down.


Do this and you will be fine.  :anim_25: