OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: A300 outlander ftf  (Read 4043 times)

Online wchadw

  • Longbeard
  • ****
  • Posts: 1735
A300 outlander ftf
« on: April 30, 2018, 06:02:04 PM »
Anyone out there with a300 have problems with 3 inch longbeard XR not feeding? I have started putting 2 3/4 I’m in my tube. Just curious

I called beretta and they acted like it was a common problem with the XR shells


Sent from my iPhone using Tapatalk

Offline Ozark

  • Full Member
  • *
  • Posts: 36
Re: A300 outlander ftf
« Reply #1 on: April 30, 2018, 06:09:07 PM »
Longbeards have a long overall length and have feeding issues in a number of guns. LBs are as good as lead gets, just follow them with a different 3 inch load and you'll be fine.

Online wchadw

  • Longbeard
  • ****
  • Posts: 1735
Re: A300 outlander ftf
« Reply #2 on: April 30, 2018, 06:29:30 PM »
Longbeards have a long overall length and have feeding issues in a number of guns. LBs are as good as lead gets, just follow them with a different 3 inch load and you'll be fine.
Yea. I been putting a 3 inch in the breech and 2 3/4 XRs in the tube. They feed. It’s odd because I have used other roll top 3in shells that seem to feed fine


Sent from my iPhone using Tapatalk

Online wchadw

  • Longbeard
  • ****
  • Posts: 1735
Re: A300 outlander ftf
« Reply #3 on: June 23, 2018, 02:37:06 PM »
all the a300's love the Magnum Blends that I have shot :turkey2:
I shot federal 3 inch TSS this year. They have rolled tops like the long beards and they cycled fine


Sent from my iPhone using Tapatalk

Spursnbeards22!

  • Guest
Re: A300 outlander ftf
« Reply #4 on: February 06, 2023, 08:02:19 PM »
A300 Outlander/ .Jebs .660

Shooting awesome patterns with Hevi 13 3/2/6’s, 3/2/7’s and Magblends.

Offline hunton35

  • Jr. Member
  • *
  • Posts: 1
Re: A300 outlander ftf
« Reply #5 on: March 16, 2023, 03:20:34 PM »
mine cycles them fine . they are a little longer though.