Apex

[Bottomland]

Anyone not have good results from the TSS loads?  I shot some APEX (#8 and blend) this weekend out of my SBE2 24'' barrel and rob Robert 670 choke and I did not get the results I figured I would. Guess I don't have the right choke.  Not real impressed.  Shot some nitro TSS and it performed pretty good.  Still don't know if its enough to make me change from shooting the older hevishot nitro 4x5x7. 

[Gobble!]

What payloads were you shooting and what kind of numbers were you getting?

[Fullfan]

Agreed something is not right, I bought some Apex 20ga loads last May and shot them after the season. They were right on track with my hand loads, 300 + - in the 10 at 41 yds.  Shooting #9 shot.

[Bottomland]

I shot the 3'' Smalltown blend and 3'' straight #8.  I shot them both at turkey head targets so haven't done the numbers on them but I just compared them to the other shells I tested and its just about the same.  Did not see any substantial increase in pattern density.  I just don't think they like the choke I have.  I've got a Indian creek I wish I would have tested but was hesitant since I only have two boxes.

I would post pics of them but can figure out how to get the attachments to work.

[Bottomland]

Just counted the straight #8 pattern bc I did shoot at a poster board.  I only counted 267 in the 10''.

Same gun shooting nitro 4x5x7 I'm over 300 consistently.

[davisd9]

Good numbers for 8s


Sent from my iPhone using Tapatalk

[Fl strutter]

The patterns will surprise you if u count them even if they don't look like more they may be. In my 870 nothing compared to Indian creek chokes.

[Boilermaker]

670 in an SBE2 is pretty wide.  Benellis are inherently tighter bore guns; you may want to try a tighter choke and see if it improves.  If the IC choke is a .665 give it a run and see if it helps.  It took a .655 to get mine to throw the patterns I was looking for at 40 yards.  But in all fairness, 267 in the 10" is not bad but it sounds like you're looking for a tighter profile.

[Fullfan]

Just counted the straight #8 pattern bc I did shoot at a poster board.  I only counted 267 in the 10''.

Same gun shooting nitro 4x5x7 I'm over 300 consistently.

267 in the 10" I would hunt that all day long. And with the Nitro loads you cam bet many of the holes in your paper are the #7's.  TSS #8 will smash them. Remember TSS #8  have  254 pellets per oz where TSS #9 have 362 pellets pre oz.

[Deast1988]

I seen ss of that guy who blew up his gun with small town blends. Looked like a high primer or something blew his whole chamber up.

[BandedSpur]

Don't know if you were shooting 2 or 2.25 oz loads, but at any rate 267/10 with 8s is very, very good. And as another poster mentioned, TSS 8s penetrate better than the HS 4s in those Nitro loads and waaaay better than the 5s and 7s.

[Gobble!]

Just counted the straight #8 pattern bc I did shoot at a poster board.  I only counted 267 in the 10''.

Same gun shooting nitro 4x5x7 I'm over 300 consistently.

If you were looking for big #s straight 9s is the only way to go.

267 with straight 8s is great. If your shooting the 2.25oz loads that would be 41% of your load or 46% if your shooting the 2oz loads. Those are great percentages and what many look for in hunting patterns. I would assume your 20" pattern looked pretty good.

I'll take 267 TSS #8s over a Nitro 4x5x7 300 pattern any day.

[taylorjones20]

I'll take 267 TSS #8s over a Nitro 4x5x7 300 pattern any day.

I agree!

[Bottomland]

Thanks for the input.  Im trying to post some of the pics of the patterns but cant figure out how to do so. 

I think also Im going to try a Indian creek .665 with the TSS and see what it does.

I did see a post on facebook about a round malfunctioning but didnt get to read the entire post before i couldnt find it.

[Bottomland]

Apex #8