only use regular PayPal to provide purchase protection
Started by BINK McCARTY, June 18, 2016, 08:33:22 PM
Quote from: lowoctane on August 25, 2016, 08:27:29 AM Clark: I so enjoy reading your posts! Your experience and candor is much appreciated on the topic. Nice to know you are involved in this crazy love affair we know as turkey hunting!!!
Quote from: allaboutshooting on June 19, 2016, 09:33:45 PMQuote from: Longshanks on June 19, 2016, 07:38:46 PMShoot some patterns with Win XX 3" 6's at 20 yds and Win LB's 3" 6's at 20 yds and post up the pics. Interested to see if anyone's results are different than mine. I've shot the LB's through 5 guns and different chokes and they are substantially tighter in the 15-20yd range than any other load. I put the entire pattern in a 8" circle several times at 40yds and A large number of patterns inside a 10" at 40. That's tight. That would just be out of my guns, other folks may have different results.At this point, I've shot several hundreds of WLB shells, from the 1st batch to the current loads. I've shot the 1 3/4 & 1 7/8 oz 3" loads of #6s extensively and the #4s & #5s to a lesser extent. I've also shot some of all 3 sizes of the 3.5" but far fewer than the 3" versions.These shells were designed as "extended range" shells and most efforts to get them to shoot larger patterns at ranges under 40 yards can be exercises in frustration. The early loads are exceptionally tight, even at 40 yards, as witnessed by the last 2 still target competitions when some of the 1st WLB shells that were loaded were shot at these events.Many times, at least with some of the later loads, thinking has to be changed to open them up some. If the resin slug is not fractured or fractured completely, the choke must serve as the secondary source of fracturing the slug to help open up the patterns. Otherwise, the only way it will fracture is air pressure after it's exited the muzzle.If you rely upon the choke as a secondary source of fracturing the slug, it must do so physically with some type of restriction or wad stopper action. A tighter e.d. may produce a more open pattern but please note the emphasis on the word may. Again, it's really all about the whole internal geometry of the choke.Since we tend to think that more open chokes produce more open patterns, this flies in the face of what we've done with other shells in the past and it does not always work.One of the most asked questions to me over the last year or so, is something like "How can I get a more open pattern with WLB shell?" After firing case after case of them, the very best answer that I know how to give is what I've just said here. it was designed as a long range shell and the best way to get more open patterns would be to use another shell, Hevi-13 for example, if most of your shots are under 40 yards and if you have concerns about missing a turkey at those ranges. Otherwise, you could spend a lot of time, energy and money trying to accomplish something that is very difficult if not impossible to achieve.Thanks,Clark07.26.16 Correction of the word "not" to the word "note" in para #4
Quote from: Longshanks on June 19, 2016, 07:38:46 PMShoot some patterns with Win XX 3" 6's at 20 yds and Win LB's 3" 6's at 20 yds and post up the pics. Interested to see if anyone's results are different than mine. I've shot the LB's through 5 guns and different chokes and they are substantially tighter in the 15-20yd range than any other load. I put the entire pattern in a 8" circle several times at 40yds and A large number of patterns inside a 10" at 40. That's tight. That would just be out of my guns, other folks may have different results.
Quote from: BINK McCARTY on October 01, 2016, 06:05:30 AMQuote from: allaboutshooting on June 19, 2016, 09:33:45 PMQuote from: Longshanks on June 19, 2016, 07:38:46 PMShoot some patterns with Win XX 3" 6's at 20 yds and Win LB's 3" 6's at 20 yds and post up the pics. Interested to see if anyone's results are different than mine. I've shot the LB's through 5 guns and different chokes and they are substantially tighter in the 15-20yd range than any other load. I put the entire pattern in a 8" circle several times at 40yds and A large number of patterns inside a 10" at 40. That's tight. That would just be out of my guns, other folks may have different results.At this point, I've shot several hundreds of WLB shells, from the 1st batch to the current loads. I've shot the 1 3/4 & 1 7/8 oz 3" loads of #6s extensively and the #4s & #5s to a lesser extent. I've also shot some of all 3 sizes of the 3.5" but far fewer than the 3" versions.These shells were designed as "extended range" shells and most efforts to get them to shoot larger patterns at ranges under 40 yards can be exercises in frustration. The early loads are exceptionally tight, even at 40 yards, as witnessed by the last 2 still target competitions when some of the 1st WLB shells that were loaded were shot at these events.Many times, at least with some of the later loads, thinking has to be changed to open them up some. If the resin slug is not fractured or fractured completely, the choke must serve as the secondary source of fracturing the slug to help open up the patterns. Otherwise, the only way it will fracture is air pressure after it's exited the muzzle.If you rely upon the choke as a secondary source of fracturing the slug, it must do so physically with some type of restriction or wad stopper action. A tighter e.d. may produce a more open pattern but please note the emphasis on the word may. Again, it's really all about the whole internal geometry of the choke.Since we tend to think that more open chokes produce more open patterns, this flies in the face of what we've done with other shells in the past and it does not always work.One of the most asked questions to me over the last year or so, is something like "How can I get a more open pattern with WLB shell?" After firing case after case of them, the very best answer that I know how to give is what I've just said here. it was designed as a long range shell and the best way to get more open patterns would be to use another shell, Hevi-13 for example, if most of your shots are under 40 yards and if you have concerns about missing a turkey at those ranges. Otherwise, you could spend a lot of time, energy and money trying to accomplish something that is very difficult if not impossible to achieve.Thanks,Clark07.26.16 Correction of the word "not" to the word "note" in para #4Clark ,can you recommend some combos? What I have currently is a SBE 2 w/ 24"bbl. Final Strut choke tubes in .640" , .650" , .655", TruGlo SSX .643" , and Ind.Creek .660"...ammo= 3.5" magblends, Fed. HW 3.5" #7 shot. Have not shot the Long Beard yet but I plan on trying #4, & #5s....also I have shot the H-13 3.5" #7 shot and put 336 in a 10" circle.....yes,I know it's a fantastic pattern but my concern is the velocity....only moving @ 1090 fps. When I shot them at a new piece of particle board I was picking some of the pellets out that were just half way in the board....others on here say I shouldn't be concerned....BUT I AM!!!! Because I want to flatten and kill quickly!!!! Amyhow,any advice would be mighty helpful!!!! And ifn you wouldn't mind , send your response to my email please!!!! binkbenelli@gmail.com . Thanks so much!!!
Quote from: turkey buster on January 02, 2017, 09:44:47 PMWe all want 200+ With lead at 40 yards but we don't want what it takes to make it happen. Shoot the shells you want and bring your bird home. No need to bash shells because you don't like them. Pattern your gun and shoot what works for you!
Quote from: BowBendr on June 19, 2016, 03:16:56 PMAt 20 and under, everything is tight.Gods of Thunder2015 Old Gobbler contest Champions
Quote from: Longshanks on January 14, 2017, 07:06:48 AMThe difference in my guns at 20 yds with LB's and XX's/ Hevi 13 is the difference between a baseball and a volleyball. Hunted with them and have seen allot of folks shooting them. The number of misses is like nothing I have ever seen or heard about. The best LB hunting pattern I came up with after allot of testing was the LB 5's and the Rem Xtra Full choke out of a Rem 870 with a 21" barrel. It was a better pattern than I have been able to generate out of any other 5 load without being overly tight at normal ranges.