OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

finishing trumpets

Started by wlf89, March 24, 2016, 02:42:49 PM

Previous topic - Next topic

wlf89

got a couple questions on finishing trumpets.
1. what do yall prefer to finish them with?
2. does type of finish effect sound in anyway?
3. what is the best way to finish the inside of the call?

thanks for the help.

CMBOSTC

#1
A lot of guys use CA to finish their trumpets. Shouldn't affect the sound. I use only sand paper on the inside of the trumpet.

ol bob

Different woods need different finishes I USE C A,  Tru oil, Tung oil, and some woods I only polish with no finish.

Crawdad

Quote from: ol bob on March 25, 2016, 01:03:29 PM
Different woods need different finishes I USE C A,  Tru oil, Tung oil, and some woods I only polish with no finish.
. Same here.

Rick Howard

Not exactly a trumpet but similar in shape... I finish the inside of my howlers with CA.  I just use a q-tip and swrirl it a few coats on until it is all covered.  I do this even after an oil finish.

You gonna have to try it.  That is the best way to answer these questions.

pappy

I finishe the out side with a combination CA and Mylands friction polish. I use the ca to seal it and the friction to get the sheen I want. The inside is either sanded and or ca glued inside then followed up with sanding to fill any cells...
my new email is paw.paw.jack@sbcglobal.net
tel...573-380-8206