OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: Opinions on a Sx3/rhino/nitro pattern !!!! Updated pattern pics!!!!  (Read 9644 times)

Offline RiverRoost

  • The Boss Gobbler
  • ****
  • Posts: 761
The place I shoot at has backstops at 55 and 100 yards. There typically is a metal frame there we can move but it was gone last weekend. So, I tested the nitro H518 on paper on a tree at 22 yards and get the poi pretty dang close to poa. The only plce I had to pattern was at a distance of 15 yards farther than we are allowed to talk about on here. Think I had a little drift to left but what do Yall think my pttern looks like so far. This is with a sx3 and a rhino .670 I've had for a while.

Have my own frame getting built so I can test at 40 this week.



Drew a 10" around the pattern to the lower left of target and got 106 & 109
« Last Edit: March 13, 2016, 10:10:31 PM by RiverRoost »

Offline taylorjones20

  • Longbeard
  • ****
  • Posts: 1333
Re: Opinions on a Sx3/rhino/nitro pattern
« Reply #1 on: March 07, 2016, 10:41:33 PM »
That's a far cry from their results lol - They are saying 280+

It will kill but personally I think since that's the choke/shell they recommend for your gun it should do better...  Maybe at 40 yards it will be what they say.

Good Luck!
Alive only by the Grace Of God

Offline RiverRoost

  • The Boss Gobbler
  • ****
  • Posts: 761
Re: Opinions on a Sx3/rhino/nitro pattern
« Reply #2 on: March 07, 2016, 10:46:37 PM »
I think what they publish is at 40 yards but that seems like a lot to jump up in just 15 yards to get their results. This is farther than I like to pattern but using what I have.

Offline BINK McCARTY

  • The Boss Gobbler
  • ****
  • Posts: 831
  • Beak first in th' dirt...
Re: Opinions on a Sx3/rhino/nitro pattern
« Reply #3 on: March 08, 2016, 01:55:09 AM »
No offense intended at all....but those are most definitely not the results you should be getting.

Offline RiverRoost

  • The Boss Gobbler
  • ****
  • Posts: 761
Re: Opinions on a Sx3/rhino/nitro pattern
« Reply #4 on: March 08, 2016, 08:07:14 AM »
No offense intended at all....but those are most definitely not the results you should be getting.


I've never done a deep cleaning or polishing on this gun. Had it since december of '14. Would this improve the pattern to what they are saying.

Again, this is 55 yds and they are saying 40 but I've never patterned much to know if it normally falls off that much between 40 and here.

Offline RiverRoost

  • The Boss Gobbler
  • ****
  • Posts: 761
Re: Opinions on a Sx3/rhino/nitro pattern
« Reply #5 on: March 08, 2016, 09:11:42 AM »
Should I change to a tighter choke?

Offline taylorjones20

  • Longbeard
  • ****
  • Posts: 1333
Re: Opinions on a Sx3/rhino/nitro pattern
« Reply #6 on: March 08, 2016, 09:23:09 AM »
15 yards past 40 yards is quite a bit when it comes to patterning.  It would help to deep clean the barrel.  Then try to shoot it at 40.  I think you will be surprised.
Alive only by the Grace Of God

Offline Dr Juice

  • 2024 SITE SUPPORTER
  • Long Spur Gobbler
  • ********
  • Posts: 7351
Re: Opinions on a Sx3/rhino/nitro pattern
« Reply #7 on: March 08, 2016, 11:04:41 AM »
That's a killer at 55-yds, but I would work on your POI. Your pattern should improve vastly at 40-yds. Good luck and looking forward to seeing your 40-yd patterning results.

Offline RiverRoost

  • The Boss Gobbler
  • ****
  • Posts: 761
Re: Opinions on a Sx3/rhino/nitro pattern
« Reply #8 on: March 08, 2016, 12:45:34 PM »
Soon as the wind and future monsoon passes I'll get back out and shoot w a clean fun at 40

Offline lowoctane

  • Longbeard
  • ****
  • Posts: 1441
  • “When I die, then I’ll be old.”
Re: Opinions on a Sx3/rhino/nitro pattern
« Reply #9 on: March 13, 2016, 06:06:05 PM »
15 yards past 40 yards is quite a bit when it comes to patterning.  It would help to deep clean the barrel.  Then try to shoot it at 40.  I think you will be surprised.

Me too!   :smiley-patriotic-flagwaver-an
I’m Old School...
GOD, GUTS AND GUNS
MADE AMERICA GREAT,
LET'S KEEP ALL THREE!
NRA Endowment
NAHC Life

Offline RiverRoost

  • The Boss Gobbler
  • ****
  • Posts: 761
Re: Opinions on a Sx3/rhino/nitro pattern
« Reply #10 on: March 13, 2016, 10:09:55 PM »
Cleaned the barrel pretty good the other day. Ran a bore snake through it once, then ran several patches with a powder and plastic solvent soaked over a brush through there several times. Left the solvent in barre for about 30 min then came back w a soaked patch then dry patches until clean and dry. Shot a kent turkey load starting off today then shot my rhino 670 at the backstop past 40 and then one at 40. I'm coming up with 245-255 in a 10" at 40 yards. Here's the pattern.




Offline Seminoleturkey

  • Sr. Member
  • **
  • Posts: 108
Re: Opinions on a Sx3/rhino/nitro pattern !!!! Updated pattern pics!!!!
« Reply #11 on: March 13, 2016, 10:28:03 PM »
That will get the job done for sure

Offline lowoctane

  • Longbeard
  • ****
  • Posts: 1441
  • “When I die, then I’ll be old.”
Re: Opinions on a Sx3/rhino/nitro pattern !!!! Updated pattern pics!!!!
« Reply #12 on: March 13, 2016, 10:40:07 PM »
I see dead Roosters... :camohat:
I’m Old School...
GOD, GUTS AND GUNS
MADE AMERICA GREAT,
LET'S KEEP ALL THREE!
NRA Endowment
NAHC Life

Offline RiverRoost

  • The Boss Gobbler
  • ****
  • Posts: 761
Re: Opinions on a Sx3/rhino/nitro pattern !!!! Updated pattern pics!!!!
« Reply #13 on: March 13, 2016, 10:50:19 PM »
Keep in mind that I wasn't able to shoot at 40 yards last time so to keep things equal I went back and shot at the backstop first, which was 15 yards past 40. Got 109 in 10" last time and 139 this time.

Here is a pattern at the backstop after cleaning


This next pic is at the backstop with a .660. It seemed to put larger shot size on paper for some reason over the .670


Offline taylorjones20

  • Longbeard
  • ****
  • Posts: 1333
Re: Opinions on a Sx3/rhino/nitro pattern !!!! Updated pattern pics!!!!
« Reply #14 on: March 13, 2016, 11:03:25 PM »
 :z-winnersmiley:
Alive only by the Grace Of God