OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

Sights for a H&R Single shot?

Started by MikeStaten, February 08, 2016, 03:00:13 PM

Previous topic - Next topic

MikeStaten

Looking to have Sumtoy customize (forcing cone, thread for choke, choke etc..) my H&R 20 gauge.  I'd like to keep the gun as light and simple as possible.  Can anyone recommend a simple sight that he can tap and install on the barrel?  I tend to like smaller aiming references as opposed to a large bead.  I may also consider a red dot but I'm hesitant to go that route for durability issues and also that it seems like it would get snagged on brush.

Thanks in advance,
Mike

J-Shaped

I'd look at having the barrel drilled and tapped for a set of Williams Firesights. A buddy of mine went that route on an NEF 10 ga. and it was a really solid setup. Call Williams and see which model they would recommend for a drill/tap application on your gun.

paboxcall

Quote from: J-Shaped on February 09, 2016, 08:47:35 PM
I'd look at having the barrel drilled and tapped for a set of Williams Firesights. A buddy of mine went that route on an NEF 10 ga. and it was a really solid setup. Call Williams and see which model they would recommend for a drill/tap application on your gun.

This.  Sumtoy drilled and tapped my NEF single 12 ga. and installed a set of Williams fiber optic sights last winter.  Excellent work there.
A quality paddle caller will most run itself.  It just needs someone to carry it around the woods. Yoder409
Over time...they come to learn how little air a good yelper actually requires. ChesterCopperpot