Mossberg Super Bantam turkey choke

[deltaV]

Hey guys,  this is my first post here.  I just bought a Mossberg Super Bantam 20ga for my 10 year old son.  We have his first youth turkey hunt coming up in a couple weeks, and I am quickly realizing I know absolutely nothing about 20 gauge shotguns. 

My son is still pretty small, so I figured the 20 would be a good starting point.  In reading some of the posts, I see many of you have killed turkeys with 20 gauge shotguns, so I am relieved.  But for the life of me I cant seem to find a turkey choke for this gun.  What are some suggestions you guys might have?  Could you also put model numbers, because I'm having a hell of a time finding anything listed for the mossberg.

Thank you!
deltaV

[sugarray]

I can't give you model numbers.  Are you looking to stay local or can you get one from the internet.  Seems like the .555 and .570 are the diameters to choose, but some are liking the TruGlo SSX in a .550, too.  It also depends on what load you are shooting and how dense a 10" pattern you are looking for.

In my Rem 870, I am shooting a Hastings .562 and Fed HW 1.5 oz #7 and getting mid 110s in a 10" at 40 yds with a good even 20" circle coverage as well.  This gives my 6 yo son plenty of wiggle room inside of 40 yds, which I highly doubt he can shoot that far anyway, just wanted to know the gun's capabilities. 

If you search the forum using the search function above, you will find some answers as well.

[R AJ]

Your gun has the invector threads which are the same for Browning invector, Mossberg accu choke , . This choke is very available , just look for invector but not invector+.

[deltaV]

Thanks guys, I'll look for the invector choke tubes

[wolverine107]

I just bought one of these as well for my 10 year old daughter and would like to know a good choke tube/load combination?

[shootumindaface]

H 13 7s and a choke in the 570 range..

[dawei]

Your gun has the invector threads which are the same for Browning invector, Mossberg accu choke , . This choke is very available , just look for invector but not invector+.

Thanks guys, I'll look for the invector choke tubes

Robert has given you excellent advice. Having interchangeable chokes was started by Winchester® in the early 1980's......................
• Browning® Invector®
• Mossberg® Accu-Choke®
• Winchester® Winchoke®
are exactly alike. Within gauge these three chokes, plus H&R®, NEF®, Savage, SKB,  and Weatherby® are fully interchangeable. If you cant find a Mossberg® choke for example, but found a Browning® or SKB® IT WILL WORK IN YOUR MOSSBERG® GUN!

[wolverine107]

Will a Primos Jelly Head work in this gun?

[dawei]

Will a Primos Jelly Head work in this gun?

No, Primos® doesn't make a 20ga Jellyhead® choke for Accu-Choke®/Invector®/Winchoke® threaded guns. They do offer a Tightwad™ choke however.

[wolverine107]

I appreciate your response!!!!  By any chance do you know who makes a choke tube for this particular gun in the .570 range?  I'm new to the 20 gauge world!!!!!

[TrkyHntr]

The primos tightwad is .570, and they do make them for the invector threads. Pretty good choke for around $20.




Shane

[deltaV]

The primos tightwad is .570, and they do make them for the invector threads. Pretty good choke for around $20.
Shane

I can only find the tight wad for the invector plus, Benelli/Beretta, and Remington in 20 gauge.... Am I missing something?

[TrkyHntr]

Here you go...http://www.gamaliel.com/cart/product.php?productid=7816&cat=1652&page=1




Shane

[dawei]

I appreciate your response!!!!  By any chance do you know who makes a choke tube for this particular gun in the .570 range?  I'm new to the 20 gauge world!!!!!

Hunter Specialties® Undertaker® Pb choke is .572". The HTL choke they offer is .582"; cost is about $20.00.

[wolverine107]

I bought the HS Undertaker today at Gander for $19.99.  Going to buy a Primos Tight Wad as well and see which one works better with the Hevi-13 #7.

I see that Hevi Shot makes a choke tube for the Mossberg 500, does anyone have any experience with that tube??