3" WINCHESTER XTENDED RANGE 6's (HTL) THRU A REM. 1187 W/21" BARREL

[SKFOOTER]

Does anyone have any experience  shooting this combination??  If so, thru what choke and how was you pattern @ 40 yards??  And would you shoot these over the 3" Hevi-13 #6?  Thanks. 

[LARRYHAYNES]

I've shot that same combination and had really good results with a jebs .660 with the XR#6s. Never shot the hevi-13 though. But the mag blends also patterned very well

[SKFOOTER]

I've shot that same combination and had really good results with a jebs .660 with the XR#6s. Never shot the hevi-13 though. But the mag blends also patterned very well

What were your 40 yard pattern numbers in the 10" circle???

[Tom Foolery]

Not an 1187 but I shot the 3" XR 5's and XR 6's from my short 870 and my numbers @ 40yds barely broke 100 with a Kicks .660 and a Kicks .665.

[LARRYHAYNES]

I've shot that same combination and had really good results with a jebs .660 with the XR#6s. Never shot the hevi-13 though. But the mag blends also patterned very well

What were your 40 yard pattern numbers in the 10" circle???

I posted em on here a couple years ago but I believe I was getting in the 150s consistently

[mossyoakpro]

I shoot that exact combo with a Kicks GT 665.  Never counted the holes but it is quite effective.

[drum817]

Shoot a pm to ncturkey he shot those shells through an 870 (21"barrel)  with a ic choke for several years..... He could give you some numbers.

[Neill_Prater]

I shot them for years with great results in the exact same gun using a MAD choke, which I have been told is a .665. As for numbers, I couldn't tell you because I wasn't into pellet counting in those days, but I killed a bunch of turkeys with them. I'd still be using them in my Remington, if they were available.

[SKFOOTER]

Neil, if it was the Mad Max choke it was made in both .655 (Model #1003) and .665 (Model #1002) constrictions for the Remingtons.  Do you happen to know what the Model # was that was stamped on the choke??