registration is free , easy and welcomed !!!
Started by golfernash, March 12, 2011, 03:58:38 PM
Quote from: golfernash on March 18, 2011, 09:51:28 AMNo, That is not me on GON. I ordered a couple of new chokes this spring as it is the first time that I have switched over to hevi shot. The hevi shot tube is by far the best out the ones I tried.
Quote from: slickyboyboo on March 18, 2011, 12:15:43 PMSince your gun has a .733 slight overbore, I would probably try out the .670 first, and the .660 second. If neither throw a good pattern, I would go directly to an IC .665.
Quote from: goblr77 on March 19, 2011, 07:33:28 PMQuote from: slickyboyboo on March 18, 2011, 12:15:43 PMSince your gun has a .733 slight overbore, I would probably try out the .670 first, and the .660 second. If neither throw a good pattern, I would go directly to an IC .665.I'm done with IC. I started off with an IC .665 w/ wad catchers and with 2.25 oz 7's averaged in the 250's with a centered low POI. I was outshooting this choke with an unported Trulock .668 with averages in the 260's and a dead on POI. I sent the IC back for a .675 w/o the wad catchers and patterned it today. My numbers jumped up in the 280's but the POI is now low right. I have two Trulock chokes and a Pure Gold buckshot choke for this gun and the POI is dead nuts with all three. I also smoked a 20ga .555 IC with a Pure Gold .670 today. IC's recommended constricions are too tight. I have a Hevishot brand choke on the way for the Xtrema and with the numbers I've seen from a couple of posters, I fully expect the IC will be going back.
Quote from: greenheadIL on March 24, 2011, 05:40:02 PMDo you guys think this Hevi Shot choke would work with a Benelli SBE 1? I also have a IC shooting a foot low at 40 and wanted to try another choke. Trying to decide between Jellyhead, Rhino, PureGold, and this Hevi Shot choke. Anyone know the diameter for the Benelli SBE with this Hevi Shot Choke?