OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

Recoil Pad For Rem 11-87 Greenleaf??

Started by SKFOOTER, February 11, 2014, 01:33:23 PM

Previous topic - Next topic

SKFOOTER

I added an Old School Rem 11-87 Greenleaf to my collection and wanted to add a Limbsaver recoil pad to it like I did to my Trebark and Bottomland 11-87's(Limbsaver #10105).  But the butt of the stock on the Greenleaf is larger than the ones on them.   I tried a Remington R3 pad but it's slightly narrower than the factory pad.  Has anyone replaced the recoil pad on a Greenleaf Remmy?? :OGturkeyhead:

SKFOOTER

Surely someone has changed out the recoil pad on a Remmy 1187 Greenleaf????

pinebark

I am looking to do the same thing except with an 870 Greenleaf.

cuppednlocked

Remington makes different size recoil pads for wood vs synthetic stocks.  Perhaps one of those will work.

yelpaholic

Since you can't find a limbsaver you could just sell me the Greenleaf... wouldn't want you to bruise your shoulder... :funnyturkey:

SKFOOTER

Quote from: yelpaholic on February 12, 2014, 08:34:10 AM
Since you can't find a limbsaver you could just sell me the Greenleaf... wouldn't want you to bruise your shoulder... :funnyturkey:
What'll you give for it?? :OGturkeyhead:

honker22

Quote from: SKFOOTER on February 12, 2014, 01:42:42 PM
Quote from: yelpaholic on February 12, 2014, 08:34:10 AM
Since you can't find a limbsaver you could just sell me the Greenleaf... wouldn't want you to bruise your shoulder... :funnyturkey:
What'll you give for it?? :OGturkeyhead:

Whatever he says he will give, I will give $20 more...
People who don't get it, don't get that they don't get it.

allaboutshooting

Quote from: SKFOOTER on February 11, 2014, 01:33:23 PM
I added an Old School Rem 11-87 Greenleaf to my collection and wanted to add a Limbsaver recoil pad to it like I did to my Trebark and Bottomland 11-87's(Limbsaver #10105).  But the butt of the stock on the Greenleaf is larger than the ones on them.   I tried a Remington R3 pad but it's slightly narrower than the factory pad.  Has anyone replaced the recoil pad on a Greenleaf Remmy?? :OGturkeyhead:

Keith,

You'll probably need a grind to fit Limbsaver pad. I have a number of "take off" pads from Remington shotguns and it all depends upon when they were made, whether they were plastic or wood, as to what the size was. They ground them to fit what they had.

Here is list, in inches, of what Limbsaver pads can be ground to fit.

Small will grind to 3 7/8 x 1 11/32
Medium to 4 1/4 x 1 5/16
Large to 4 7/16
Medium/Plus to 3 28/32 x 1 11/32
Medium/Half to 4 1/4 x 1 5/16

One of those should fit your gun. It's an easy job for a gunsmith or a handyman who has or has access to a grinder. You just need to make sure you have the correct pad.

Please let me know if I can be of help.

Thanks,
Clark
"If he's out of range, it just means he has another day and so do you."


yelpaholic

Quote from: SKFOOTER on February 12, 2014, 01:42:42 PM
Quote from: yelpaholic on February 12, 2014, 08:34:10 AM
Since you can't find a limbsaver you could just sell me the Greenleaf... wouldn't want you to bruise your shoulder... :funnyturkey:
What'll you give for it?? :OGturkeyhead:

thanks a lot skfooter she a beauty......... :drool: