OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

Pot call for high humidity

Started by Shellwaster, April 03, 2012, 11:33:13 AM

Previous topic - Next topic

Shellwaster

The last few days I haven't been able to run my glass or copper pots due to the early morning humidity. What are my options as the humidity has been 87% and up.
Should I look into a carbon striker on the glass or copper surface or should I look for a different surface material and continue to use one of my wood strikers?

Thanks for your ideas.

lightsoutcalls

#1
I would suggest anodized aluminum surface with a dymondwood striker.  ;D

I have never been one for using acrylic or carbon strikers, but you might try one of these on a glass call.  
Lights Out custom calls - what they're dying to hear!


woodwzrd

Give carbon a try on your glass call.

I ran mine with a carbon striker in a light rain last year and it still ran fine.

dirt road ninja

Quote from: lightsoutcalls on April 03, 2012, 12:18:18 PM
I would suggest anodized aluinum surface with a dymondwood striker.  ;D

I have never been one for using acrylic or carbon strikers, but you might try one of these on a glass call. 

X2

Turkey Trot

What makers in the broader marketplace and/or on this forum make the better acrylic and carbon strikers?
Until The Turkeys Have Their Historians, Tales Of The Hunt Shall Always Glorify The Hunter

woodwzrd

Quote from: Turkey Trot on April 03, 2012, 03:07:47 PM
What makers in the broader marketplace and/or on this forum make the better acrylic and carbon strikers?

Take your pick. Most guys that make pot calls make one or the other or both.

Gooserbat

Quote from: lightsoutcalls on April 03, 2012, 12:18:18 PM
I would suggest anodized aluminum surface with a dymondwood striker.  ;D

I have never been one for using acrylic or carbon strikers, but you might try one of these on a glass call.  

Exactly what Wyndel said.  I might add that a bead blasted aluminum then anodized will probaly be better than one thats just anodized.   
NWTF Booth 1623
One of my personal current interests is nest predators and how a majority of hunters, where legal bait to the extent of chumming coons.  However once they get the predators concentrated they don't control them.

blacky

A  full line of calls.
www.genesturkeycalls.com

TauntoHawk

Gobblerstopper (Andy of Kaisers Kalls) made me a carbon thats really good on my crystal, copper, and anodized aluminum and I never liked carbon at all before. His ivory tipped strikers have all kinds of grab and an awesome sound too

like said anodized or blasted Aluminum with run great in those conditions also ceramic would be a good one as well.

Quote from: Turkey Trot on April 03, 2012, 03:07:47 PM
What makers in the broader marketplace and/or on this forum make the better acrylic and carbon strikers?
<blockquote class="imgur-embed-pub" lang="en" data-id="l4hWuQU"><a href="//imgur.com/l4hWuQU"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>

xcallmaker

Quote from: Shellwaster on April 03, 2012, 11:33:13 AM
The last few days I haven't been able to run my glass or copper pots due to the early morning humidity. What are my options as the humidity has been 87% and up.
Should I look into a carbon striker on the glass or copper surface or should I look for a different surface material and continue to use one of my wood strikers?

Thanks for your ideas.
I make a rain striker that I developed last year and works quite well with ceramic and pretty well on glass however it is not suitable for copper,aluminum,slate as it will cut these softer materials. The striker is wood with a special coating.
Kelly Gadus
Www.gadusgamecalls.com