OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

First whack at corian

Started by Cut*N*Run, March 20, 2012, 07:33:56 PM

Previous topic - Next topic

Cut*N*Run

I was able to scoop up a 3/4" thick piece on ebay. Bronzed glass with a glass soundboard. Nice to be able to pull a call off the lathe and glue it right up.




Thanks for looking!

stone road turkey calls

Stone Road Turkey Calls / Gary Taylor
2013 Norseman 3rd place pot call
2013 Grand national 6th place pot call
2014 Midwest 3rd place pot call
2015 Midwest 5th place HM Tube call

TRKYHTR

Looks good, how does it sound? All the Corian I get is 1/2". I wish I could get some 3/4". I didn't even know they made it 3/4", at least thats what the guy tells me where I get mine. aybe just a different maker.

TRKYHTR
RIP Marvin Robbins


[img]http://i261.photobuck

Cut*N*Run

Quote from: TRKYHTR on March 20, 2012, 07:42:38 PM
Looks good, how does it sound? All the Corian I get is 1/2". I wish I could get some 3/4". I didn't even know they made it 3/4", at least thats what the guy tells me where I get mine. aybe just a different maker.

TRKYHTR

Thanks. It sounds nice- really crisp. They make the 3/4" in only a few of the colors. I just found an ebay seller who has scraps of it- mostly too small for calls and mostly in 1/2".

I did find that you can order 4"X4"X1/2" pieces direct from corian for $2 a piece. That's a $4 call blank after gluing and I paid $14 for the piece I bought and only got 1 call out of it. Next time I'll probably try the 4X4 samples.

TRKYHTR

Go to your local counter top contractors or look them up in the phonebook. I found one near me that sells nothing but Corian countertops. I wlked in one morning and talked to some of the workers and then found the boss. I told him what I was doing and he took me to the shop where they cut it. There were so many pieces of scrap along the wall you couldn't see the wall. He asked me what size and I showed him with my hands and he took me over and gave me a couple peices about 10X24. The next time I went in I brought some doughnuts and bagels. He filled up my trunk. Good luck,

TRKYHTR
RIP Marvin Robbins


[img]http://i261.photobuck

Cut*N*Run

Quote from: TRKYHTR on March 20, 2012, 08:04:59 PM
Go to your local counter top contractors or look them up in the phonebook. I found one near me that sells nothing but Corian countertops. I wlked in one morning and talked to some of the workers and then found the boss. I told him what I was doing and he took me to the shop where they cut it. There were so many pieces of scrap along the wall you couldn't see the wall. He asked me what size and I showed him with my hands and he took me over and gave me a couple peices about 10X24. The next time I went in I brought some doughnuts and bagels. He filled up my trunk. Good luck,

TRKYHTR

My chisels might revolt and attack if I brought home I load like that!

I'll look. Thanks Joe!

TRKYHTR

Yea that Corian is hard on the tools. Good luck,

TRKYHTR
RIP Marvin Robbins


[img]http://i261.photobuck

handcannon


M,Yingling

Not taking orders for calls at this time ,,,but my have some on hand  ,,,I Dont sell strikers
I do like copper pot calls,,,,Get them While u can
My YouTube
https://www.youtube.com/user/CallerTurkey

superx2


moonman

Keep your nose in the wind,your eyes on the skyline.

Basser69

Good looking call! I like it

Y'all talking about scraps or drops, I found a guy in town that will give you all the granet you can haul. Stuff is great for gluing on because the ca and epoxy will scrape off it



kenturkey89

Brian