Egw or sumtoy mount

[slave601]

Mounting a Burris FF4 on a 20 gauge franchi affinity 3. Any pros vs cons on sumtoy or the Egw universal .670 mount

[runngun]

Personally, I really like the SUMTOY!!!

Have a good one, Bo

Sent from my SM-S908U using Tapatalk

[SumToy]

One is lower, one fits contour of gun, one fits factory drilled holes.

[Glades]

Get the sumtoy. It will fit your Franchi like a glove.

[slave601]

One is lower, one fits contour of gun, one fits factory drilled holes.

Good deal! Just ordered one from you today!

[beagler]

Big fan of the Sumtoy mounts.

[Ridge Rooster]

Have several Sumtoy mounts and been very satisfied. noticed the Jebs new mount at the NWTF Convention and was impressed so there is another to consider.

Ridge Rooster

[slave601]

Have several Sumtoy mounts and been very satisfied. noticed the Jebs new mount at the NWTF Convention and was impressed so there is another to consider.

Ridge Rooster

I didn't know jebs came out with a mount. Any pics of it?

[Ridge Rooster]

No I didn't take one but talked to the owner of Jebs at the NWTF Convention and was impressed with the mount.

Ridge Rooster

[Christopher39752]

Go with Sumtoy. I've used both but on the EGW RMSc mount the fit was slightly off and wouldn't let the sight sit perfectly flat on mount.

[CGhost]

sumtoy, just got mine and my BFF3 mounted on my franchi, fits like a glove!

[Teamblue]

You will like your new mount!


Sent from my iPhone using Tapatalk

[GuideGun]

Franchi has same factory holes as a Benelli. Order the Scalarworks Sync mount. The lowest, securest, most rugged mount out there. But you'd need to run a RMR or Holosun red dot (which imo is better than Burris/Vortex anyway)

[slave601]

Franchi has same factory holes as a Benelli. Order the Scalarworks Sync mount. The lowest, securest, most rugged mount out there. But you'd need to run a RMR or Holosun red dot (which imo is better than Burris/Vortex anyway)

The egw sat perfectly snug on my franchi 20 gauge. I've also got the scalarworks and holosun on my benelli sbe2. Bought another holosun to put on my browning and it wouldn't hold zero on several mounts. Sent the holosun back

[GuideGun]

Franchi has same factory holes as a Benelli. Order the Scalarworks Sync mount. The lowest, securest, most rugged mount out there. But you'd need to run a RMR or Holosun red dot (which imo is better than Burris/Vortex anyway)

The egw sat perfectly snug on my franchi 20 gauge. I've also got the scalarworks and holosun on my benelli sbe2. Bought another holosun to put on my browning and it wouldn't hold zero on several mounts. Sent the holosun back

Yeah I just run RMRs and Aimpoints, have yet to have an issue.  But those Scalarworks mounts are awesome regardless.