registration is free , easy and welcomed !!!
Started by suzukigs750ez, December 06, 2021, 08:43:32 AM
Quote from: eggshell on December 08, 2021, 07:34:23 AMSomething that I think many new users miss is the calls are not always ready to use out of the package. Most need tuning. Tuning means making them fit comfortably in your mouth roof, bending and or twisting to chamge sound. Also there is an up and down side, most packaging explains thisHere is my approach on every new call. Put in in my mouth and see how comfortable it is. Does it go up into the curve of my mouth without a lot of deforming the tape. The answer to this is almost always "no" for me. The next thing I do is trim a very small amount of tape off all the way around the call, maintaining shape. Try fit again. Trim more tape if not a fit. You want to stop, when it still seems a little bit too big. Next, with the call in the roof of your mouth take your thumb and push it up bending it some to the shape of your mouth, not a lot. It should feel like it's completely seated. Try blowing it. If it souunds better ten practice with it that way until you get turkey sounds. If it still wants to fall out and not seal, trim a little more or bend more. Remember the seal is key. If air goes around or over the call it won't sound right. All air must go across the reeds. After you have turkey sounds you can tune for more quality with bending and twisting. Yeah you'll ruin a few calls before you figure it out, but that is called unsecured investment.