Thinking about .410 for next year

[Meleagris gallopavo]

It has a hump, Almost like a piece of keystock underneath that rail that stick up above the barrel slightly.  It had two holes that are tapped.   Sumtoy makes a mount and I thin EGW makes one that is counter sunk on the back side that fits right over it.  Then the two screws and your set.

Thanks!  That's for the Savage/Stevens 301, right?


Sent from my iPhone using Tapatalk

[guesswho]

Yes.   Kind of a funny deal, but works fine.

[Meleagris gallopavo]

Yes.   Kind of a funny deal, but works fine.

Yeah.  That'll work.


Sent from my iPhone using Tapatalk

[Meleagris gallopavo]

This is the key stock piece.


Sent from my iPhone using Tapatalk

[guesswho]

Yes, it sticks up about 1/8" above the barrel, maybe a tad more.   

[Meleagris gallopavo]

Yes, it sticks up about 1/8" above the barrel, maybe a tad more.

Yep.  No biggie.


Sent from my iPhone using Tapatalk

[Spring Creek Calls]

https://topguntacticalsales.com/product/lazer-la-xt18-sh-14-single-shot-28-ga-shotgun-black-coloured-receiver-black-polymer-stock-3-chamber-20-barrel/

[Meleagris gallopavo]

https://topguntacticalsales.com/product/lazer-la-xt18-sh-14-single-shot-28-ga-shotgun-black-coloured-receiver-black-polymer-stock-3-chamber-20-barrel/

I'd go with a 28 gauge.  But I'd prefer it be drilled and tapped.  I didn't see that in the description.  Plus it doesn't have any info on the choke or choke tube compatibility.


Sent from my iPhone using Tapatalk

[Spring Creek Calls]

https://topguntacticalsales.com/product/lazer-la-xt18-sh-14-single-shot-28-ga-shotgun-black-coloured-receiver-black-polymer-stock-3-chamber-20-barrel/

I'd go with a 28 gauge.  But I'd prefer it be drilled and tapped.  I didn't see that in the description.  Plus it doesn't have any info on the choke or choke tube compatibility.


Sent from my iPhone using Tapatalk

I'm thinking about one for myself. I sent an inquiry about choke tube threads, if it's Mobil chokes I'm going for it. I don't use optics so drilled and tapped is no issue. 3" chamber and a safety instead of hammer are good for me also.

[Meleagris gallopavo]

Anyone ever cerakoted a 301 Stevens?  I'm toying with that too.  The cerakote may cost more than the gun.


Sent from my iPhone using Tapatalk

[Yoder409]

https://topguntacticalsales.com/product/lazer-la-xt18-sh-14-single-shot-28-ga-shotgun-black-coloured-receiver-black-polymer-stock-3-chamber-20-barrel/

I may be behind the times or missing something...............but did someone start making a 3" shell in 28 gauge ??  I was never aware of anything other than 2 3/4" in the 28 

[Spring Creek Calls]

https://topguntacticalsales.com/product/lazer-la-xt18-sh-14-single-shot-28-ga-shotgun-black-coloured-receiver-black-polymer-stock-3-chamber-20-barrel/

I may be behind the times or missing something...............but did someone start making a 3" shell in 28 gauge ??  I was never aware of anything other than 2 3/4" in the 28

There are a few gun manufacturers that are making 3" 28 gauge guns, mostly or all European, and the same with the ammunition. Fiocchi offers a few options in the 3" 28.

[owlhoot]

https://topguntacticalsales.com/product/lazer-la-xt18-sh-14-single-shot-28-ga-shotgun-black-coloured-receiver-black-polymer-stock-3-chamber-20-barrel/

I may be behind the times or missing something...............but did someone start making a 3" shell in 28 gauge ??  I was never aware of anything other than 2 3/4" in the 28

There are a few gun manufacturers that are making 3" 28 gauge guns, mostly or all European, and the same with the ammunition. Fiocchi offers a few options in the 3" 28.

Wow , learn something new today. Thanks.