Comb riser/raiser

[btomlin]

How many optics users add a comb riser to their shotguns?   Even with the low sumtoy mount, I feel like my head/cheek is loose on the stock. 

Anyone have any "homemade solutions"??   I'm sort of brainstorming but if I can add a few options it would be great.

[WV Ridge Reaper]

Check out godagrip..good stuff I run one on my 410.

[paboxcall]

Put a Beartooth padded riser on my little 20 gauge. Helps soften recoil too.

[the Ward]

Accu-riser. I don't know how to do a link but it is on a website called leatherman. It has been around for years, they attach either with screws like a recoil pad for a factory look, or strap versions if you don't want to drill. They have a few different models.

[bbcoach]

Beartooth Comb Raiser X2.  Neoprene slips on the stock, different height foam adjustments goes under the neoprene allowing you to raise the position of your cheek to your desired height.  Beartooth allows for a dual purpose, 1. It raises your cheek to your desired height 2. It is padded so it keeps you from getting that cheek slap from the recoil of those 3 or 3 1/2 inchers.  I love mine on my 835 with Bushnell Red dot and 3 1/2 inch Hevi 7's.

[guesswho]

This is what I use.   
https://triadtactical.com/triad-stock-pack/

[Ozark Ridge Runner]

I have a Benelli M2 and they have 2 different comb inserts that are higher than standard.  I use the medium and it fits pretty good with the base that I machined to mount a Leupold Delta Point Pro.  It's a slick set up.

[btomlin]

Thanks folks.

Red Green would be proud of my engineering.   I elected for the small slice/section of noodle and tape method for this year.  I decided I didn't want to spend more on a system until I find out if I like it.

[Greg Massey]

Cut you piece of swim or pool noodle and wrap it to your stock with that camo medical stretch tape that sticks to itself.

[captpete]

Cut you piece of swim or pool noodle and wrap it to your stock with that camo medical stretch tape that sticks to itself.

I did something similar on the wife's 20ga. I used the foam that I had left over from a Beartooth comb riser and wrapped it with black vet wrap to match the black synthetic stock. It holds perfect, is soft and helps remove some of the recoil/cheek slap.

[Greg Massey]

Cut you piece of swim or pool noodle and wrap it to your stock with that camo medical stretch tape that sticks to itself.

Agree that's a good job and will save you few dollars and it will always be easy to change...

[lunghit]

Here is my gun with an Accu-Riser. Works great

[DirtNap647]

Godagrip shotgun wedge

[lowoctane]

Here is my gun with an Accu-Riser. Works great

Nice! Dedicated!

[lunghit]

Here is my gun with an Accu-Riser. Works great

Nice! Dedicated!

Thanks!! She's a good gun.