OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

Hide shiny receiver

Started by wchadw, December 10, 2020, 11:59:19 PM

Previous topic - Next topic

wchadw

On my O/U. See pic(not mine). Is this gun tape?
Thought about old sock or facemask?
Anyone have any suggestions?



Sent from my iPhone using Tapatalk

captpete

The picture appears to be "Vet Wrap". It sticks to itself without leaving a sticky residue. I'm not sure if you can get it camo, but it does come in a variety of colors. Another option would be to buy a small piece of Mossy Oak vinyl. It applies rather easy and again leaves no sticky residue.

10gaugemag

My dad uses this on his 1100. If any residue left after peeling it off a shot of WD-40 will take residue right off.

https://www.hsstrut.com/product/tape-gun-bow-edge/

paboxcall

Quote from: captpete on December 11, 2020, 07:02:57 AM
The picture appears to be "Vet Wrap". It sticks to itself without leaving a sticky residue. I'm not sure if you can get it camo, but it does come in a variety of colors. Another option would be to buy a small piece of Mossy Oak vinyl. It applies rather easy and again leaves no sticky residue.

Does look like vet wrap. The vet wrap comes in numerous camo colors. Was given a couple rolls from a friend and member here on OG that's digital camo.

Use it to wrap one of my wingbones which is a bit too white and shiny.

Example:  https://www.amazon.com/Self-Adherent-Wrap-Cohesive-Camouflage/dp/B07792N8BL/ref=pd_lpo_121_t_0/141-1572655-6555964?_encoding=UTF8&pd_rd_i=B07792N8BL&pd_rd_r=b427868f-dfad-4558-bd08-6d6a29defb6f&pd_rd_w=x0nou&pd_rd_wg=967c1&pf_rd_p=7b36d496-f366-4631-94d3-61b87b52511b&pf_rd_r=AK5BYYP1VW6ZNAXJJKQN&psc=1&refRID=AK5BYYP1VW6ZNAXJJKQN
A quality paddle caller will most run itself.  It just needs someone to carry it around the woods. Yoder409
Over time...they come to learn how little air a good yelper actually requires. ChesterCopperpot

wchadw

Thanks. Guess I could do vet wrap and slide forward when loading/unloading


Sent from my iPhone using Tapatalk

captpete

I'm not sure the vet wrap would slide. I used it on the stock of the wife's gun to add a riser and some padding for her cheek. It's pretty solid and doesn't move. You might take a look at Mossy Oak Graphics. It's vinyl sheeting that is basically permanent until YOU want to take it off. It is fairly easy to apply, fairly inexpensive and doesn't leave residue when you do take it off. I used one of their kits to camo a 1187 Premier. When I took it off after 3 years, the gun looked just like it did when I applied it.

https://www.mossyoakgraphics.com/mossy-oak-matte-camo-roll

https://www.mossyoakgraphics.com/shotgun-wrap-mossy-oak-camo-gun-skin

wchadw

I googled around and found a camo baby leg warmers. May work


Sent from my iPhone using Tapatalk

captpete


Tom007

Quote from: captpete on December 12, 2020, 07:20:13 AM
I'm not sure the vet wrap would slide. I used it on the stock of the wife's gun to add a riser and some padding for her cheek. It's pretty solid and doesn't move. You might take a look at Mossy Oak Graphics. It's vinyl sheeting that is basically permanent until YOU want to take it off. It is fairly easy to apply, fairly inexpensive and doesn't leave residue when you do take it off. I used one of their kits to camo a 1187 Premier. When I took it off after 3 years, the gun looked just like it did when I applied it.

https://www.mossyoakgraphics.com/mossy-oak-matte-camo-roll

https://www.mossyoakgraphics.com/shotgun-wrap-mossy-oak-camo-gun-skin


Put this Mossy Oak Graphics on my sweet 16. Easy to install, no residue, and can be ordered gun specific. Was inexpensive too. Good luck....

Tom007


paboxcall

Quote from: Tom007 on December 12, 2020, 05:02:50 PM
Quote from: captpete on December 12, 2020, 07:20:13 AM
I'm not sure the vet wrap would slide. I used it on the stock of the wife's gun to add a riser and some padding for her cheek. It's pretty solid and doesn't move. You might take a look at Mossy Oak Graphics. It's vinyl sheeting that is basically permanent until YOU want to take it off. It is fairly easy to apply, fairly inexpensive and doesn't leave residue when you do take it off. I used one of their kits to camo a 1187 Premier. When I took it off after 3 years, the gun looked just like it did when I applied it.

https://www.mossyoakgraphics.com/mossy-oak-matte-camo-roll

https://www.mossyoakgraphics.com/shotgun-wrap-mossy-oak-camo-gun-skin


Put this Mossy Oak Graphics on my sweet 16. Easy to install, no residue, and can be ordered gun specific. Was inexpensive too. Good luck....

Looks awesome, Tom. Great work.

My OCD would never let me to do that good of a job LOL.
A quality paddle caller will most run itself.  It just needs someone to carry it around the woods. Yoder409
Over time...they come to learn how little air a good yelper actually requires. ChesterCopperpot

Tom007

Quote from: paboxcall on December 12, 2020, 06:19:36 PM
Quote from: Tom007 on December 12, 2020, 05:02:50 PM
Quote from: captpete on December 12, 2020, 07:20:13 AM
I'm not sure the vet wrap would slide. I used it on the stock of the wife's gun to add a riser and some padding for her cheek. It's pretty solid and doesn't move. You might take a look at Mossy Oak Graphics. It's vinyl sheeting that is basically permanent until YOU want to take it off. It is fairly easy to apply, fairly inexpensive and doesn't leave residue when you do take it off. I used one of their kits to camo a 1187 Premier. When I took it off after 3 years, the gun looked just like it did when I applied it.

https://www.mossyoakgraphics.com/mossy-oak-matte-camo-roll




https://www.mossyoakgraphics.com/shotgun-wrap-mossy-oak-camo-gun-skin


Put this Mossy Oak Graphics on my sweet 16. Easy to install, no residue, and can be ordered gun specific. Was inexpensive too. Good luck....

Looks awesome, Tom. Great work.

My OCD would never let me to do that good of a job LOL.


Thanks PA, but I had help from a patient wife who is good with the exacto knife. The hair dryer makes this stuff easy to apply. I am confident that anyone on this forum can do it. Great product. Be safe my friends....

Jstocks

I am thinking of doing cerakote or a hydro dip on my receiver on the yildiz sxs.

Tom007

I am sure you will love it....good luck

wchadw

For anyone interested the "camo baby leg warmers" work pretty well. See pic


Sent from my iPhone using Tapatalk