Which burris mount for franchi affinity 20

[jjnfla]

Any one got a model # for the burris mount for the franchi affinity 20,any help would be great jj

[SumToy]

you can put a burris 336 mount or one of ours.  Both are great ways to mount them.   

[jjnfla]

you can put a burris 336 mount or one of ours.  Both are great ways to mount them.
I bought the burris 336 the holes don't line up.

[jjnfla]

you can put a burris 336 mount or one of ours.  Both are great ways to mount them.
I bought the burris 336 the holes don't line up.

This is what I bought but won't line up,am I missing something

Sent from my SM-G965U using Tapatalk

[cutt down]

Any one got a model # for the burris mount for the franchi affinity 20,any help would be great jj

If your looking for a pic rail then it's the weaver 93A I'm 99.9% positive. Sumtoy has the best mount though. See his pic! It's low profile & looks great.

[BINK McCARTY]

My vote is for the Burris -Marlin 336 mount MPN# 410333, i got mine, LOw, Low, low....

[BINK McCARTY]

Any one got a model # for the burris mount for the franchi affinity 20,any help would be great jj

Burris MPN : 410333. Pretty sure.

[turkeyhunter91]

if you have trouble finding a Burris i would recommend the sumtoy mount, i have one on mine and i really like it.

[bwhana]

Digging the Sumtoy on my brand new Affinity 3!

[Nathan_Wiles]

Sumtoy for my Franchi 20. Its perfect.

Sent from my SM-N960U using Tapatalk

[obro]

If your gun was factory drilled and tapped the Burris mount won't work . The hole spacing is different . You will need to use the Sumtoy mount . If your gun was not drilled and tapped from the factory guys had them drilled to the spacing of the 336 mount .

[Spurs Up]

If your gun was factory drilled and tapped the Burris mount won't work . The hole spacing is different . You will need to use the Sumtoy mount . If your gun was not drilled and tapped from the factory guys had them drilled to the spacing of the 336 mount .

What he said.

[BINK McCARTY]

you can put a burris 336 mount or one of ours.  Both are great ways to mount them.
I bought the burris 336 the holes don't line up.

This is what I bought but won't line up,am I missing something

Sent from my SM-G965U using Tapatalk

Pretty simple solution if you have a gun gun Smith or machinist ( My father in law did mine) take the mount & gun and show what the problem is then have them drill another hole in the Burris mount and viola' problem solved. Like I said my father in law did mine and well....you see the result. Good luck brother!

[Nathan_Wiles]

The new Affinity 3's have nearly rounded reciever on top. I tried the modified 336 Burris mount. I did not care for how it was perched on top of the reciever. Its probably fine strengthwise but it looked unstable to me.

Sent from my SM-N960U using Tapatalk

[KentuckyLB]

Digging the Sumtoy on my brand new Affinity 3!

Same exact gun and set up i carry also ...the Sumtoy Mount sit very clean on the gun.