Williams Slugger sights on Browning Gold

[10gaugemag]

Is anyone running these sights on a Gold shotgun? I would like to try them but am wondering if there is room under the rib on the Gold.

[SKFOOTER]

There's plenty of room.

[10gaugemag]

I have read a few reviews where people had to contact Williams to get a taller ramp for the rear sight. Is this an ongoing issue with some guns or have they started building taller ramps and sending them with the sights?

[10gaugemag]

I received the sights from Midway today. Replaced the factory Hi-Viz with a white bead and got the Williams on. Need to get a wee bit shorter screws for the front since the ones sent with the sight hit the barrel but satisfied otherwise. Great bang for the buck.

[taylorjones20]

Yeah I have a set of tru glow on my browning and I had to move the front part of the sight back a little so the screws wouldn't hit the barrel...

[10gaugemag]

Yeah I have a set of tru glow on my browning and I had to move the front part of the sight back a little so the screws wouldn't hit the barrel...

May give that a shot.

[slicksbeagles1]

I HAD TROUBLE WITH THE REAR SIGHT AND THE RAMP NEEDED TO BE TALLER. IF YOU HAVE PROBLEMS CALL STEVE CURTIS AT WILLIAMS REAL NICE GUY 1-800-530-9028 OR 810-653-2131 EXT.228

[10gaugemag]

I HAD TROUBLE WITH THE REAR SIGHT AND THE RAMP NEEDED TO BE TALLER. IF YOU HAVE PROBLEMS CALL STEVE CURTIS AT WILLIAMS REAL NICE GUY 1-800-530-9028 OR 810-653-2131 EXT.228

My ramp is tall enough right now with this particular set up. Slid up so the last mark is aligned. May call them anyway to get a taller one in case I swap loads/chokes in the future and things don't go as planned.