OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
Gooserbat Game Calls
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Need help with 835 recoil pad

Started by Borden811, April 28, 2025, 09:45:42 PM

Previous topic - Next topic

Borden811

Hey guys. Recently ran across a gun I've been looking for forever. Found one of the OG mossberg 835s with the 24" barrel, skinny round ribbed forearm, and the realtree brown leaf camo. Does anyone have any idea what aftermarket recoil pad fits it(preferably a Simms of some variety). I bought the one listed for the 835 on Simms website, but the holes don't line up, and the pad itself is quite a bit larger than the stock. I'm guessing the early synthetic stocks were a smaller size than the current 835s. Anyone have any experience with this, or any helpful info?

Tom007

Had the same problem with a 90's 835 Mossy Oak Treestand Turkey gun. Just can't find a match for some reason. Good luck...

Borden811

Well that's not what I was hoping to hear, lol

Manager8

Reach out to Falcon strike they might be able to help. Falconstrikeusa.com


Sent from my iPhone using Tapatalk

Borden811

They very well may be, but that's almost more than I paid for the gun, lol. I'm just looking for something that's a little more forgiving than the brick that's on the gun currently.

Alabama556

I had to buy a recoil pad that was sanded to fit. You can do it on a belt sander if you are not concerned about it looking perfect.

Pachmayr makes pads that are not too expensive and they have templates on their website you can print out to see what size you need.


Sent from my iPhone using Tapatalk

bbcoach

#6
I have an 835 and it has a hollow butt stock.  I put the 10201 on it.  Not sure what number you have tried.  Here is the dimensions and hole placement from website.  If this is the one you have, a slip on or a grind to fit maybe your only option.

https://cdn.shopify.com/s/files/1/1999/2905/files/10201.pdf?v=1613670236

Greg Massey

I needed one replaced on an old side x side shotgun and I took it to my local gunsmith and in about 3 weeks he called and had it ready... My old side x side had a vintage red pad and that's what I wanted him to replace it with and it was a grind to fit and looks great...