OG shop member gallery
OldGobbler
          bullet Forum Board      bullet Pushpin Turkey Call Blog      bullet Advertising Info     

OG Gear Store
PATCHES


Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow






Author Topic: SX4 Long Beard XR 3” #6 JEBs HH .650  (Read 6129 times)

Offline limbhanger777

  • Sr. Member
  • **
  • Posts: 101
SX4 Long Beard XR 3” #6 JEBs HH .650
« on: March 13, 2019, 09:04:35 PM »
Just got my JEBs headhunter .650 in the mail today had to go out and try it out quick. Shot 40 yards off hand to see what it would do. 38 degrees outside and I managed to put 202 pellets in a 10” circle. I didn’t think it was too bad. I will post more pictures when I get warmer weather and a chance to pattern more.






Sent from my iPhone using Tapatalk

Offline limbhanger777

  • Sr. Member
  • **
  • Posts: 101
Re: SX4 Long Beard XR 3” #6 JEBs HH .650
« Reply #1 on: March 13, 2019, 09:05:26 PM »
The choke just look awesome too BTW




Sent from my iPhone using Tapatalk

Offline Dr Juice

  • 2024 SITE SUPPORTER
  • Long Spur Gobbler
  • ********
  • Posts: 7347
Re: SX4 Long Beard XR 3” #6 JEBs HH .650
« Reply #2 on: March 14, 2019, 06:30:21 AM »
Awesome pattern. I still have to pattern my 11-87 with the same choke. It was recommended to me to try HS #6s through it for the best results. We shall see ...

Offline Vinci1964

  • Full Member
  • *
  • Posts: 63
Re: SX4 Long Beard XR 3” #6 JEBs HH .650
« Reply #3 on: March 16, 2019, 01:50:31 PM »
Nice pattern. Love those Jebs chokes.

Offline Greenhead12

  • Full Member
  • *
  • Posts: 50
Re: SX4 Long Beard XR 3” #6 JEBs HH .650
« Reply #4 on: May 15, 2020, 04:24:49 PM »
That dog will hunt, nice shooting.

Offline BREEZE

  • Jr. Member
  • *
  • Posts: 8
Re: SX4 Long Beard XR 3” #6 JEBs HH .650
« Reply #5 on: January 28, 2021, 10:56:10 AM »
Nice pattern. I have a NWTF SX4 I just bought. Trying to get set up. Bought a IC .665 but not happy with pattern. Have you tried a 3.5 out of that choke yet?

Offline Happy

  • Limbhanger
  • ******
  • Posts: 4347
Re: SX4 Long Beard XR 3” #6 JEBs HH .650
« Reply #6 on: January 28, 2021, 09:54:53 PM »
Not trying to rain on your parade but I think #6s should do better. Looks a little ragged in my humble opinion. Here is a pattern of #5's for comparison and I would expect your 6's to beat it. I think you might be a bit overchoked if I were to guess. Like I said not trying to put it down but I think it can be improved.

Sent from my SM-G960U using Tapatalk


Good-Looking and Platinum member of the Elitist Club

Offline BREEZE

  • Jr. Member
  • *
  • Posts: 8
Re: SX4 Long Beard XR 3” #6 JEBs HH .650
« Reply #7 on: January 29, 2021, 08:55:48 AM »
I can agree its got a couple hole's but its also a 3" so thats mostly why I wanted to know if he tried a 3.5.   I have a IC .665 with 3.5 long beard #5's and got less than 150 in the 10 so trying to decide what to try next.

Offline Happy

  • Limbhanger
  • ******
  • Posts: 4347
Re: SX4 Long Beard XR 3” #6 JEBs HH .650
« Reply #8 on: January 29, 2021, 09:04:59 AM »
I can agree its got a couple hole's but its also a 3" so thats mostly why I wanted to know if he tried a 3.5.   I have a IC .665 with 3.5 long beard #5's and got less than 150 in the 10 so trying to decide what to try next.
I would look at the payload as opposed to the shell length for a more apples to apples comparison. Mine was a 2oz load. Like I said I don't think its horrible but I would be looking for an even pattern above and beyond the total # of pellets in the circle. Some of my favorite loads won't crack 200 at 40 but it is a nice and even pattern.

Sent from my SM-G960U using Tapatalk


Good-Looking and Platinum member of the Elitist Club

Offline BREEZE

  • Jr. Member
  • *
  • Posts: 8
Re: SX4 Long Beard XR 3” #6 JEBs HH .650
« Reply #9 on: January 29, 2021, 10:25:47 AM »
Well I could have said have you shot a 2 oz load instead of a 1 3/4 oz load I guess. But its the same difference either way. Im just wanting to see if he put 202 in a 10 with a 3" I mean 1 3/4 oz shell how many did it do with a 2 oz shell.


HUNTER727

  • Guest
Re: SX4 Long Beard XR 3” #6 JEBs HH .650
« Reply #10 on: April 28, 2021, 11:06:54 AM »
I just recently purchased a nwtf sx4 cantilever turkey and absolutely love it. I tried an IC .665 and wasn't real happy with its performance so I ordered a .665 Sumtoy and got great results that im more then happy with. I shot 3.5" longbeard 5's out of mine

Offline lowoctane

  • Longbeard
  • ****
  • Posts: 1441
  • “When I die, then I’ll be old.”
Re: SX4 Long Beard XR 3” #6 JEBs HH .650
« Reply #11 on: May 03, 2021, 06:36:04 AM »
 :morning:
It’s hard to beat one of William’s tubes...
I’m Old School...
GOD, GUTS AND GUNS
MADE AMERICA GREAT,
LET'S KEEP ALL THREE!
NRA Endowment
NAHC Life