Crystal mistress what to condition with

[pseshooter300]

Just ordered a crystal mistress and didn't know if it come with a conditioner or what everyone uses to condition this call with?

[Candyman]

I used a stone on mine to rough it up good. Then when it needs a touch-up I use drywall screen.

[Jroddc]

I used a stone on mine to rough it up good. Then when it needs a touch-up I use drywall screen.

Same

[pseshooter300]

I wish I would have new that I would have ordered a stone also

[bbcoach]

Drywall screen or sandpaper.  Drywall screen doesn't clog up as bad but 100-150 grit sandpaper works well also.

[outdoors]

Definitely  Drywall screen

[southern_leo]

Conditioning stone left to right, then one direction drywall screen. It will remove the glass dust between the scrapes and should run good.

Sent from my SM-N920V using Tapatalk

[ChainReactionGC]

I use quite a few different things. Always have a stone and sandpaper. Using different grit materials will make the call sound different and make it more versatile. I will say that one of my favorite materials to condition crystal and glass is the roll of heavy duty sand paper from O'Reilly's autoparts. It's about 3/4" thick and about 24" long. I cut it off in 1" sections. It's 80 grit and/or 100 grit. That little piece can be used multiple times and I love the sound I get from it's conditioning. Always wipe the dust from the crystal, so it doesn't clog the grooves in the conditioning and/or clog the striker faster.

Sent from my XT1254 using Tapatalk

[silverspur]

It should come with drywall screen, mine did

[kjnengr]

I used a stone on mine to rough it up good. Then when it needs a touch-up I use drywall screen.

Same

Same here as well. 

[LabsRUsII]

Try abranet 240 grit the clean with alcohol pad  https://knottsknives.com/shop?olsFocus=false&olsPage=products/ambranet-mesh-sandpaper
Great for sanding on lathe too

Sent from my SM-G955U using Tapatalk