Factory full choke and TSS

[bvoss]

Anybody shoot a flush factory full choke and TSS9's? What kind of pattern are you getting if so? Will be out of a Franchi 20 gauge.

[crow]

In a CZ Bob white 20ga. Their factory full patterned very good, almost equal to a Truloc flush .581 turkey choke . And both of those chokes had center core patterns not much less than Truloc  .571 ext. And  Carlsons .575 extended  chokes.      I'd try your  factory  full before buying  anything.

[DocHolliday]

While not a factory full choke, I recently set up a Browning BPS 21" with a Trulock Full (extended). The intent was to get a good HUNTING pattern, that is, I was willing to sacrifice some extra numbers at 40 for a good 15"+ pattern at 20. I tried ImpMod and Full. The full did everything I was after.

[TrackeySauresRex]

Not factory either.
28" Browning Bps, Trulock .585 flush. 8-1/2" ninja's @40 

[bvoss]

Just shot my factory full and a Carlson .575 today. Factory full put 208 in the 10" at 40. The .575 put 260. These were both out of dirty barrels.

[BrowningGuy88]

I have used both modified and full in 20 gauges. They both work.

We have a Moss 500 22" barrel that does almost 300 with flush factory chokes. I actually have the modified in it shooting 1-5/8 ounce of 9's.

[bvoss]

That's impressive! I like the idea of doing a flush choke just to keep the barrel shorter and easier to handle.

[Ranman]

I use the Carlson's.575 in my Franchi 20ga.. TSS#9