Sight Mount for M1 Super90

[Cruiser]

I have acquired a Benelli M1 Super 90, Advantage Timber in 20 gauge and plan to put a Fastfire on it. Recommendations on a rib mount? Meadow Creek, Sumtoy, other? Thanks

[SumToy]

Drill and tap the receiver. 

[Dylan730]

I have the Aimtec saddle mount, works well just not with my Eotech 512. If you are interseted in it let me know. I would not drill and tap a M1 Super 90 the receiver is to thin.

[Cruiser]

I have the Aimtec saddle mount, works well just not with my Eotech 512. If you are interseted in it let me know. I would not drill and tap a M1 Super 90 the receiver is to thin.

Interesting comment; I wondered as it is a lightweight gun. But; (see above) Sumtoy recommended drill and tap? I am going to put a micrometer on it

[Dylan730]

If its one of the original stamped HK, do some internet searches, you will find a lot of information on it.

[Cruiser]

If its one of the original stamped HK, do some internet searches, you will find a lot of information on it.

Not H&K stamped; "Benelli U.S.A Corp-Accokeek, MD Made in Italy" . it is a 20 gauge. I have an H&K Montefeltro, 12 gauge.

[ShortMagFan]

Saw you pose the same question over on 24hcf. If Sumtoy says to D&T that's all I would need to hear. As I said in my response on 24hcf I've personally had 2 M2s D&T'd without issue. I'd be surprised if the M1 receiver was thinner than an M2

Don't overthink this.

[Cruiser]

Saw you pose the same question over on 24hcf. If Sumtoy says to D&T that's all I would need to hear. As I said in my response on 24hcf I've personally had 2 M2s D&T'd without issue. I'd be surprised if the M1 receiver was thinner than an M2

Don't overthink this.

Agree

[Greg Massey]

Get you a speed bead mount ... they work just fine, cheaper and you don't have to send your gun off ...

[madstrutter]

Meadow Creek will put it out on the rib where it needs to be and makes the most sense.  The field of view you get with a rib mounted optic is amazing, and you can hit the controls on the red dot without moving.