Winchester SX3 Waterfowl

[teke]

I was wondering if anyone knew of a choke tube shotshell combo for this shotgun. It has a 28" barrel and is chambered for 3 1/2" shells. To use for Turkey.

[SumToy]

put a 675 in it.  The HV-13 6's, 7's or the blends will work good. 

[CSAW]

I use a Jellyhead with H13 3-2-6's through mine. 

[Reloader]

JellyHead, Star Dot, or ICBDS should give you plenty of satisfaction.

I run that gun and an SX2, both with 26" pipes.

Good luck,

Reloader

[hd mike]

I have the same gun.
After asking the guys here at OG, I went with the Hevi-Shot choke tube (.664)
I patterned using H-13, 3.5", #6 shot.  At 45 yds I had around 220 in a 9" circle. And 38 in the head and neck area. I also shot at 28 yds, and could not count the pellets because the head area was missing from the target.
I also bought a box of H-13 #7, a few days ago. But have not shot those yet.

My season is two weeks away, can't wait!

[chipper]

I have the same gun only in MOBU, I'm shooting a IC .665 and Winchester extended range #6 It is a great pattern. A few pages back I have some pattern pictures you can look at.

[teke]

Thanks for replies all. Right now using winchesters new signature series turkey choke with .660 cons. At 40yds. 15 shot in head and neck with Kent 3 1/2 , 2 1/4 #6 shot. Will have to do, its turkey season..

[SumToy]

You may just change to the HV-13 and it work good if that choke is working like that.

[Limbstrutter]

I've got the same gun too, I just use the extra full that came with the gun and Nitro #6's and so far everything that has stepped in front of this gun has died. Killed one last week some were in the range between 22 to 28 yards flipped him on his back stone cold dead..

Good luck !  Dave .

[NothingLeFT]

Dont know if it woould pattern the same but i have the SX2 waterfowl and i got a Hevi-shot turkey choke in it and im shootin hevi-shot hevi-13 #5's `2-1/4