Looking to build a NEF 10

[turkeybill34]

Have some questions,how hard is it to find thumb hole stocks?is it hard to find one with threads for chokes?And do they com drilled for scopes standard or will i have to do so myself?Trying to figure out how much I'm gonna have in it.Thanks

[Beretta686]

I too am building a NEF 10.  I just had the barrell cut and threaded. It was already drilled and tapped. I was looking for a pistol grip stock, but am not able to find one for a 10 and it will not mount. So far have not found a stock, thumbhole is not available from the factory eithr.

Sent from my Droid using Tapatalk

[presdme]

Hi, I started out with h&r ultra slugger deluxe 12 gauge. Its a tack driver,50 yards 3 shot all touching. Then I ordered a composite thumbhole stock from the factory to match. After that I ordered a 10 gauge turkey barrel from the factory. It comes with a screw in choke and they are drilled and tapped for a scout scope mount (drilled about 1/2 way down barrel). I personally did not care for that style so I then had it drilled for a regular scope mount put on a Bushnell trophy, added a kicks gobblin thunder choke tube. It shoots winchester supreme #6 180s and up at 40 yards in 10 inch circle. So now I have a slug gun that will shoot with the best out there and a good turkey gun all in the same case. Switch over from deer to turkey is a screwdriver and 60 seconds!! Gotta love these h&rs!! Good luck and GOOD HUNTIN!!!!

Just found a used h&r 10 gauge turkey special drilled for scope with removable choke 225.00 delivered to your ffl.

[turkeybill34]

Thanks for info,figured I will keep eye's peeled at the local gun shops and try and find on that was close to what I want but if not gonna build for next year.Good info keep it coming,

[BrowningGuy88]

You will find your laminated stocks at Boyds Gunstocks. Just google them. They make quality stuff.

[presdme]

Daman is 100% correct. In fact thats who makes them for h@r. Good stuff!!

[turkeybill34]

Thanks for the help.

[mohunter]

Will the H&R 12ga stocks not fit on the 10ga ?

[turkeybill34]

not sure?

[gobbler74]

Will the H&R 12ga stocks not fit on the 10ga ?

Good Q:

I know if you look up aftermarket..they list everything but the 10 but may take some R&D work to know for sure .. an H&R with a synthetic shurshot type of stock would be sweet..theres a mossy oak breakup 10 H&R at a local mom and pops here that would be a good candidate..short barrel and threaded too 

[BrowningGuy88]

Will the H&R 12ga stocks not fit on the 10ga ?

The butt stock will from Boyd's. You will need to specify 10gauge/12 gauge Ultra Slug Hunter to get the correct fore end from H&R.

[turkeybill34]

good info,thanks