10 ga load for Mag 10

[platinumwindow99]

AnglePorting by Ballistic Specialties cut my barrel down to 23" and install a Nonported  SS .680 turkey choke on my Mag 10, what would be a good starter load for it??? thanks

[OldMarine]

I like the Federal No-4,they pattern best in my gun.When I bought my Mag 10 in 1982 it arrived with a 26 " full choke .Mark  Bansner cut my barrel down to 23 ",installed a permanent choke ,but some of the Nitro loads are too hot for my choke ,but  people rave about their shot  patterns.

[Mag10]

All I ever had any luck with were winchester red  double XX #5,  High Volocity Blacks did poorly.

[Devastator]

i would give the new fed 7's a try with a non ported choke.i have a ballistics 690 ported in my sp10 and i was having great success with win hv 6's but they stopped making them.

[platinumwindow99]

Found  5 boxes of Remington Premier Hevi-Shot magnum turkey loads  10 ga.     3 1/2" 1225 Vel.   1 7/8 oz of shot  #6 shot.. You think they will  pattern good with that .680 choke

[S.C.C]

Found  5 boxes of Remington Premier Hevi-Shot magnum turkey loads  10 ga.     3 1/2" 1225 Vel.   1 7/8 oz of shot  #6 shot.. You think they will  pattern good with that .680 choke

They pattern good enough out to 50yards in by BPS with a PG.680....
Average 160 to 180 hits in a 10" circle at 40 yards in mine....
They pattern and kill birds as good or better than any lead shells
I've used over the years...

[BIGBOB]

I would try the 10ga. hevishot 5s.IN MY MAG 10 with a rhino choke they throw the best pattern at 60 yds i have ever seen. We killed 3 birds last weekend in tn with the mag 10. 2 were 64 and 47 yds.Good luck

[surehuntsalot]

Found  5 boxes of Remington Premier Hevi-Shot magnum turkey loads  10 ga.     3 1/2" 1225 Vel.   1 7/8 oz of shot  #6 shot.. You think they will  pattern good with that .680 choke

I would sure give them a try and see what they will do