OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

M2 barrel cleaning?

Started by Ranger007, March 20, 2015, 11:40:18 PM

Previous topic - Next topic

Ranger007

Any advice or tips on cleaning a M2 barrel?

Cleaned it from factory with #9 and been pulling bore snake between shots didn't know if anyone did any deep cleaning on these guns? I assume no polish is needed?

Want to get it shined up for next week

turkey_slayer

Chrome lined so don't polish. Just a good cleaning will suffice. Just clean with alcohol then run a dry patch through it. Oil in the barrel will usually open patterns.

01Foreman400

I use Shooters Choice Xtreme Cleaner. Let it sit in the bore for about 10 minutes.  Then run 2 dry patches down it.  Then put some on a brush and make 25 passes with it.  Then use a dry patch until it's clean. Then run a patch of denatured alcohol and then a dry patch and you're ready to go.

This was after 5 shots.  You can see how the plastic from the wad builds up.



Sent from my iPhone using Tapatalk
Huntin Fool From Georgia!

01Foreman400

I will also polish my barrels by hand every 2-3 years. Nothing aggressive though. 


Sent from my iPhone using Tapatalk
Huntin Fool From Georgia!

Ranger007

Thanks that's what I need to do before next week