Ok guys, I have decided to get away from loading TSS and have all my stuff ready to sell.
I have a MEC 600 jr loader, originally .410 (didn't know when I bought it) that has had shell holder removed and a 12 gauge crimp starter and finisher installed. Set up to load 3" 2 oz TSS loads. I have the .410 components and the 8 and 6 pt crimp starters, currently has the 6 pt on it. Has 1 container of shot and an empty powder container
I have a MTM 1200 scale and Lyman 5th edition shotshell reloading handbook.
Components include:
2400 1 lb 1 oz and Blue Dot Powder 13 oz (both including container)
From Precision:
20 g roll crimp
28 g 1/8" felt wad 236/250
20 g overshot wad ~236/250
10 lb PSP buffer
From Ballistic:
12 g 3" TPS wad preslit 33/100
12 g 2.75" TPS wad preslit 95/100
12 g 3" primed Multi Hull # 33/100
12 g 3.5" primed Multi Hull # 7
20 g 3" primed Fiocchi Hull # 83/100
VP90 20 g unslit wad 234/250
Tyvex over cushion wad plenty
20 g 1/4" felt 180/250
20 g obturator gas seal 236/250
20 g 1/8" felt 180/250
20 g 1/4" cork wad ~180/250
12 g overshot card very few used/500
Thin Mylar wrap 25/100
20 g CSD 20 wad ~235/250
Mica Wad Slick
TSS #9 1 lb 4 oz$350 plus actual shipping
Raymond
