choke threads

[kyhareraiser]

does anyone know the size and threads per inch of the rem choke in 12 ga  and the same thing for a mossberg 500 12ga

[nyhunter]

explain what you want a little better. I'm assuming you wanna make a choke to fit a Remington and Mossberg!

[allaboutshooting]

does anyone know the size and threads per inch of the rem choke in 12 ga  and the same thing for a mossberg 500 12ga

Rem-Choke  .812 x 32 TPI

Win-Choke  .812 x 32 TPI

Thanks,
Clark

[SumToy]

Moss 500, Win/Browning invector, some H&R's,  weatherby, and Hawk use same choke. 
.808 body .806 threads.

Rem chokes .816 body .809 to .812 threads

Both 32 tpi. 

[R AJ]

does anyone know the size and threads per inch of the rem choke in 12 ga  and the same thing for a mossberg 500 12ga

Rem-Choke  .812 x 32 TPI

Win-Choke  .812 x 32 TPI

Thanks,


Clark

Clark,
According to this then Remington chokes are the same as Win-Choke. This can not be.

[allaboutshooting]

does anyone know the size and threads per inch of the rem choke in 12 ga  and the same thing for a mossberg 500 12ga

Rem-Choke  .812 x 32 TPI

Win-Choke  .812 x 32 TPI

Thanks,


Clark

Clark,
According to this then Remington chokes are the same as Win-Choke. This can not be.

Robert,

The O.D. of the threads and the TPI are the same (within normal tolerances) and the difference in the 2 products is the O.D. of the barrel of the choke.

For example, on an extended turkey choke, you can turn down that o.d. and put a Rem-Choke tube in a Win-Choke threaded gun.

Flush mounted chokes for those guns are a different length of course but the thread o.d. and TPI are the same, again within normal tolerances.

Thanks,
Clark

[R AJ]

Thanks Clark, good to know and I stand corrected. I just didn't want some to assume that a Remington and Win Invector are interchangeable. Size matters again.

[allaboutshooting]

Yes Robert. I understand. It's always good to make things as clear as possible.

Thanks,
Clark

[SumToy]

I can post some pics of what happens.  You shoot junk or shoot wrong choke I have a box full of barrels blown up.  Think long before you tell folks that.   I have one that a big box store had to pay for because of that.