OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

kee kee help

Started by otis, March 21, 2012, 09:51:12 PM

Previous topic - Next topic

otis

 :wave:  i want to learn how to  kee kee on a pot  do you use a hard striker



thanks  otis

West Augusta

That and a well polished aluminum surface will help you learn then you can move to glass. Plain aluminum is the easiest. I also go side to side near the rim for the Kee kee then finish with a normal yelp.
No trees were hurt in the sending of this message, however a large number of electrons were highly inconvenienced.


WillowRidgeCalls

A denser wood striker helps make it easier to kee kee. A couple very important things is to make sure you keep the angle of your striker exactly the same all the way through your motions, if it changes any at all the call will start to break over like a yelp. Secondly you have to kill as much of the vibration as you can in the striker, spread your fingers out a little and pinch it tight. Just run a straight line through the area where you normaly play your calls, the more the call is played the easier it is to kee kee on.
To run a kee kee run, as you finish your last kee kee release the preasure on your striker and snap it straight down into the call, just like you do on a yelp.
Wisconsin Turkey and Turkey Hunting Pro-Staff
Scott

TRKYHTR

Here is Sadler McGraw the 2009 GNCC friction champion.

TRKYHTR

http://www.youtube.com/watch?v=E2XA6KbcNDM
RIP Marvin Robbins


[img]http://i261.photobuck

TauntoHawk

I just figured it out last night after some previous failed attempts..

as opposed to a yelp where you start closer to the call rim and drag the striker toward the center of the call. Start a hair closer to the rim and slide the striker to the side, I made like a little half moon shade keeping the angle and pressure the same.

I had best sucess with a yellowheart striker on an anodized aluminum surface
<blockquote class="imgur-embed-pub" lang="en" data-id="l4hWuQU"><a href="//imgur.com/l4hWuQU"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>

WillowRidgeCalls

Quote from: TauntoHawk on March 28, 2012, 11:18:38 AM
I just figured it out last night after some previous failed attempts..

as opposed to a yelp where you start closer to the call rim and drag the striker toward the center of the call. Start a hair closer to the rim and slide the striker to the side, I made like a little half moon shade keeping the angle and pressure the same.

I had best sucess with a yellowheart striker on an anodized aluminum surface
You can get away with a little arc on an alum surface, if you do it on a glass keep it straight east/west, other wise it will want to break over.
You do a whine the same way as the Kee Kee, just slow your stroke down and less pressure to keep it softer.
Wisconsin Turkey and Turkey Hunting Pro-Staff
Scott

TauntoHawk

thanks willow, yeah I went over to my crystal today and figured out I had to keep it straighter, Ill work on the whine too then

really trying to refine my calling since I have til the End of April to even start with Juniors
<blockquote class="imgur-embed-pub" lang="en" data-id="l4hWuQU"><a href="//imgur.com/l4hWuQU"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>

herronjr

have not tryed it but i heard the keekee disc woodheaven makes is real good.