Sighting in FastFire 3

[ddturkeyhunter]

I read a good post a while back about how you go about sighting in a FastFire 2. I printed it at the time because I knew I would need it some day and know I can't find it. I got my FF3 today from ineedmoregeer and need to find the right way to sight it in can any one help me out. Thanks

[Shellwaster]

The directions that came with the sight explain how to do it. Basically use the screw driver provided to adjust windage and elevation to change you point of aim

[glennz]

Red Dots are very simple. Set a target up 10-15 yds away. Draw a small circle. Shoot your gun from a shooting bench or something that can hold the gun steady on the target. Aim directly at the circle you drew and fire. Adjust up-down, left-right to make your dot be aiming directly at the point of impact from your shot. Take another follow up shot and you should be in the bullseye. Its as simple as adjusting the dot to the point of impact.

[ddturkeyhunter]

Thanks

[ghillie]

There is a sticky topic at the top that shows a good way...

Or you could also use a bore laser sight too...