Trumpet call makers design

[squeaky]

I have found a certain call design that I have been able to run with some consistency. The horn I'm currently able to run is made by Jeremy Simpson. I simply believe I'm able to run this horn due to his design. I have tried horns with larger holes and I struggle with controlling the air in those type designs. Jeremy's horn also has a flat surface on the end of the bell versus a concave bell. I'm curious to know if there are other call makers that use a similar design. I have attached a picture for reference as to what I'm referring too in above information. Jeremy's calls on the right and JR Teague on left.

[Spring Creek Calls]

I am just the opposite. I like the open bell and control the air by inserting my finger up into the bell. I can play both styles but prefer the open bell. I can see where the flat base would be beneficial for those that lay the finger across the bell opening.

Sent from my SM-A156U1 using Tapatalk

[davisd9]

Anthony Ellis may be another one you would like as his internals are a bit tighter than others.

[howl]

Forest, trees.

If you are meeting challenge, learn on a Jordan first; which the subject caller may be. Jordans have that small end for finer manipulation and have less to mess with you internally. The sound of a trumpet comes from you. The call just makes pulling on the elastic string of air inside it easier to do differently than just suckin' on a wingbone.

The best deal going for a Jordan is the Mosses Creek copy of Kenny Morgan's.

[squeaky]

Thanks for the feedback so far!

[bpsmag1026]

I believe Chris Brumfiel makes some that are similar to that

[Zobo]

KP and D Slaton.
Many others are in between those two designs