OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

M2 sling swivel question.

Started by Snood Life, March 25, 2023, 09:27:15 PM

Previous topic - Next topic

Snood Life

I was trying to find a solution with the ole google with not luck. Then it hit me, ask the brain trust.

So here is question. I recently purchased a M2. Today was the first day in the woods with it. When walking with it over my shoulder the sling swivel kept rubbing up and down creating a squeaking noise.  The below piece is the one I am taking about.

Any one run into this? Fixes other than duck tap :)
I would typically wd40 something, but I had the gun dipped. So I am unsure what some of my normal solutions would do to the gun finish.




Sent from my iPhone using Tapatalk

Dtrkyman

I had that issue with my sbe2, it would click while walking, if I remeber correctly I changed the style of attachment on the sling.  Been a while so I don't have a specific answer for you.

You could put some mole skin like used for archery on the sling attachment but it may not last long?

ShortMagFan

I hate those things. I now zip tie my sling directly to the barrel

Guskie

I put a small rubber o-ring on the bar that slides through the sling stud to quieten mine.

Old Timer

Try Vaseline. Worked on my swivels

Turkeybutt

Quote from: Old Timer on March 25, 2023, 11:41:17 PM
Try Vaseline. Worked on my swivels
That is what I used on my M2 and it worked.

Chief Razor

I put bow string wax on mine. Usually one application will last a few years.

matt3d

Quote from: Guskie on March 25, 2023, 11:38:44 PM
I put a small rubber o-ring on the bar that slides through the sling stud to quieten mine.
I did the same on mine. Worked great.

Old Gobbler

See if the sling swivel can be unscrewed...then put some Teflon or nylon washers on it , there usually in faster drawer section in lowes or home Depot ..

:wave:  OG .....DRAMA FREE .....

-Shannon

Snood Life


bwall3220

I couldn't stand that small sling stud either, the constant clicking when I walked through the woods drove me insane! I probably went a little overboard but I removed that, drilled out the hole, and machined the inside out to accept this qd mount

https://noveske.com/products/flush-qd-sling-mount/

RoadRunner