Franchi affinity drill and tap?

[turkeyhunter91]

I was talking to a gun smith today who told me to drill and tap my franchi affinity he would have to machine some material off of the reciever because it had a grove down the top of the receiver. The groove I am talking about is the groove that goes all the way down the receiver to the rib. I was wondering to the people who have had 1 drilled and tapped if they had there risers machined down or of it will work fine just drilling and tapping it? Thanks

[longislandloco]

Nonsense! Find a more competent gunsmith!

[Elmerfudd]

I had zero trouble drilling and tapping mine, and I didnt do that. Maybe he cant center a hole properly? Find another smith.

[03a3]

I have a Tristar 20 gauge with that riser also can you tell me what mount you used I can drill and tap myself just need to know what mount.

[turkeyhunter91]

I have a Tristar 20 gauge with that riser also can you tell me what mount you used I can drill and tap myself just need to know what mount.

i used a sumtoy mount

[03a3]

Called sumtoy he told me they don't make or have a scope base for tristar and does not know which one to use I need a flat base along the top of the receiver and don't know what to use.Right I have a clamp on 11 mm mount but it movers after about 3 shots. Any help would  be greatly appreciated.

[03a3]

Well I found one TR inports have one that fits in the grove on top of the receiver for 11 mm dove tail but you have to drill and tap for the screws. this so someone else can make it work.

[WylieCoyote]

Well I found one TR inports have one that fits in the grove on top of the receiver for 11 mm dove tail but you have to drill and tap for the screws. this so someone else can make it work.

I have a tristar and went through the same bull-crap so I'll save you some trouble.

  Sun optics has the dovetail to picatinny mount you're looking for. I think the part number is 7015 maybe 7025 can't remember.
   Sumtoy ain't hitting on nothing.
Truglo has an adapter.
Amazon has about 4 or 5 different ones also.
The issue is once you put that on the gun plus your optic with a picatinny mount, your sight sits ridiculously high off the receiver.

Best fix..... Order a EGW base for the Ruger pc9 carbine/marlin 189. It's flat, thin, and available in different footprints to bolt your red dot straight to it. Drill and tap the receiver, screw the base down and mount your sight. It doesn't get any lower profile than this setup without customizing stuff.



Sent from my moto g(7) power using Tapatalk

[Hoot 000]

Don't know what model you have but the one I have is already drilled and tapped, the holes have tiny rubber or plastic plugs

[WylieCoyote]

Don't know what model you have but the one I have is already drilled and tapped, the holes have tiny rubber or plastic plugs

I have the raptor youth 20ga. It unfortunately isn't tapped.

Sent from my moto g(7) power using Tapatalk

[SKFOOTER]

Contact Meadow Creek Mounts and get a rib mount.

[SumToy]

If you want to drill and tap call me and get a mount. (the best way)   If you dont want to drill and tap the only other way is Meadow Creek Mounts.     

[03a3]

Just recived the mount from TR imports it works on the dove tail of my tristar and is correct only have to drill and tap one hole I am so happy. TR imports have some nice shotguns as I have two of them.

[WylieCoyote]

Egw

Sent from my moto g(7) power using Tapatalk