OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

registration is free , easy and welcomed !!!

Main Menu

New lathe

Started by Sanatorium, June 22, 2019, 03:21:06 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Sanatorium

June 22, 2019, 03:21:06 PM
Picked this beauty up today as I retire one of my half horse rikon lathes.  Fella's it's a world of difference going from a half horse to 1 horse...so much more power. That's why I have been waiting to replace a few of my older lathes since I got the nova DVR 7 years back. 

Sent from my SM-G950U using Tapatalk

outdoors

#1
June 22, 2019, 05:11:19 PM
 :icon_thumright:  CONGRATULATIONS.  :icon_thumright:
Sun Shine State { Osceola }
http://m.myfwc.com/media/4132227/turkeyhuntnoquota.jpg

noisy box call that seems to sound like a flock of juvenile hens pecking their way through a wheat field

Sir-diealot

#2
June 22, 2019, 05:47:34 PM
Congratulations, I hope to get one myself one day.
Strength does not come from winning. Your struggles develop your strengths. When you go through hardships and decide not to surrender, that is strength. Arnold Schwarzenegger

John Koenig:
"It's better to live as your own man, than as a fool in someone else's dream."

espo16

#3
June 22, 2019, 06:52:22 PM
Check to my sure your headstock doesn't get hot


Sent from my iPhone using Tapatalk

Sanatorium

#4
June 22, 2019, 06:54:50 PM
Has there been issues with them?

Sent from my SM-G950U using Tapatalk

espo16

#5
June 22, 2019, 06:57:43 PM
Bunch of folks saying they heated up pretty good. One guy even took a video and the temp was Over 100 degrees. I saw one earlier this week while I was in Colorado at a woodcraft and the sales man said "they do get warm"


Sent from my iPhone using Tapatalk

Sanatorium

#6
June 22, 2019, 06:59:37 PM
That's not good ..
I have had issues with my nova getting warm while working on it...
If this one does the same I'll bounce to a jet and get my money back..I cant afford to  be a lathe down with current work load in the shop

Sent from my SM-G950U using Tapatalk

espo16

#7
June 22, 2019, 07:24:03 PM
I've wanted the 1216 since it first came out. That's the only complaint I've seen on it. Keep us posted. If yours does the same I will save to get the 1836


Sent from my iPhone using Tapatalk

mmclain

#8
June 23, 2019, 06:05:04 PM
If you are wanting a lathe that won't heat up. Get one with a Leeson 220v DC motor.  Smooth. fast.  quiet. I've run one for 6 hours W/O turning it off and 20+ hours start/stop.   

Nolehoe

#9
July 18, 2019, 01:29:04 PM
Just got my 1216 about a month ago. Initially they bearings get hot until they break in. Mine would get to 115 deg within a few minutes without any load on em. Got about 10 hours of run time on it and the heat issue resolved itself. However they still make noise like one of them is bad. If they dont replace it under warranty  soon im just going to order a  set . I think the company you can order from is cxb, and they run about $12 a set. I upgraded from a delta 46-250

Sent from my SAMSUNG-SM-G935A using Tapatalk

Greg Massey

#10
August 06, 2019, 05:29:24 PM
Nice setup ...
Print
Go Up Pages1
User actions