fore end nut/cap

[tnanh]

I have an 870 20 gauge and I have two fore end nuts/caps for it. One of them goes on smooth and one of them makes clicking sounds when I put it on. Does it matter which one to use on it?

[turkeyinstrut]

The one that is making the clicking sound is probably the original one from the factory as they are suppose to make a clicking sound when they are tightened up, the other one is probably aftermarket.

[tnanh]

Will they work equally well? The one that clicks doesn't have a swivel stud in it and the smooth one has a swivel stud in it. The gun came with both when I bought it used a few years ago and I have never shot it.

[Spring Fever]

As long as the barrel feels tight when you snug it down shoot it.
I have one with a swivel and it doesn't click
Not had a problem yet
My factory one does click though
Your good make sure it's tight and hunt it

[turkeyinstrut]

It should work okay but you might want to periodically check once in a while when you are hunting.

[tnanh]

Thanks for all the replies. I knew this was the best place to ask.