Red Dot

[VaBoy]

Looking to put a red dot on a 11-87 20 gauge . Seen lots of comments on Fastfire III and have looked seriously at them but have seen little to nothing on the Burris First Strike. Seems very similar but $ 100 cheaper. Anyone got any input or experience with these sites.

[357MAGNOLE]

The fastfire is superior.

If you want to keep it under $100 I strongly recommend hopping on EBAY and grabbing a Bushnell TRS-25. They are absolutely fantastic for the price point. I got mine for about $75 shipped.

[VAHUNTER]

I have used a Bushnell red dot on my 835 for the past 8 or 9 seasons.
Has never let me down.

[Bamalimbhanger]

i went all in and purchased a aimpoint  micro t-2 from larue tactical. its very pricey

[Bowguy]

Let me ask you red dot picatinny rail guys a question. Have a gun Burris doesn't make the low mount for so gonna have to do the rail, but how high is everything than? I wanna make sure you're  able to cheek the gun n still see properly. Suspecting it's gotta be high

[bbcoach]

This is what I put on my 835 8 years ago to correct a POI/POA issue https://www.natchezss.com/bushnell-trophy-6-moa-30mm-red-dot-sight-with-weaver-rings.html
I only shoot 3 1/2" shells, it has been on airplanes and in the back of my pickup to South Dakota, Wisconsin, Kansas, Florida and locally without any problems.

[Stickbow98]

The red dot on my T/C Encore sat too high on the rail mount... I used one of these. Worked great!

http://www.accu-riser.com/accu-riser-monte-carlo-strap-on-comb-raiser/

[Bowguy]

The red dot on my T/C Encore sat too high on the rail mount... I used one of these. Worked great!

http://www.accu-riser.com/accu-riser-monte-carlo-strap-on-comb-raiser/

Thanks Stickbow, looks like it would work. Does it move though when you shoot?

[Stickbow98]

Your welcome.

No, it cinches down pretty solid...although I did place a small strip of double-sided tape on the top edge of the stock to be "double sure". (not NECESSARY, just my choice) 

Good shooting,
Ron

[Bowguy]

Your welcome.

No, it cinches down pretty solid...although I did place a small strip of double-sided tape on the top edge of the stock to be "double sure". (not NECESSARY, just my choice) 

Good shooting,
Ron

Thanks again!
Mike