OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Question about factory D & T holes on Benelli SBE2

Started by Neil, February 17, 2016, 11:47:16 AM

Previous topic - Next topic

Neil

Hey guys, could someone tell me if the factory D &T holes on the SBE2 are just pins? Do I punch them out or are the caps on top removed and unscrewed?.

mkg0026

They are just little plastic pins. Push them out from the bottom.


Borden811

Yep, just take the barrel off and tap them out from the inside. The last couple I took out required quite a bit of force to get them out, so be careful not to ding up the threads.