OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Remington Receiver

Started by tha bugman, January 30, 2015, 11:35:09 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

tha bugman

January 30, 2015, 11:35:09 AM
Are all recievers standard tapped?  I was looking at a weaver rail and it said it was for a mossberg...but I can't seem to find one for a remington.

Roost 1

#1
January 30, 2015, 04:14:53 PM
No... Need to find one for your particular gun..

340_Dart

#2
January 31, 2015, 10:24:13 PM
The standard 1 piece weaver rail for 870s is 429M. I believe only super Mag guns come directly from the factory with a drilled and tapped receiver, so if you have a 3" gun that is drilled and tapped, it was done later in life and could have used a number of different rails that "will work" but not necessarily built for an 870.

rusty4269

#3
January 31, 2015, 10:32:58 PM
You can get a blank picatinny rail and cut to size. Then drill your holes to match the holes in your receiver. I just did it with my benelli so I could custom fit it to my gun. I'm very pleased with it. I bought it on Amazon for $9.50 shipped to my door.

Jeremiah 29:11

Jeremiah 29:11

owlhoot

#4
February 01, 2015, 08:23:35 AM
The 3" turkey model, within the last 3 years or so is tapped from the factory. you will need the correct base. Have not been any around.

But buddy finally found one at cabelas for his.
Print
Go Up Pages1
User actions