OldGobbler

OG Gear Store
Sum Toy
Dave Smith
Wood Haven
North Mountain Gear
North Mountain Gear
turkeys for tomorrow

News:

only use regular PayPal to provide purchase protection

Main Menu

Drill and tap

Started by jerf, March 13, 2014, 07:12:30 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

jerf

March 13, 2014, 07:12:30 PM
Local gunsmith told me he could drill and tap my h/r topper 12 gauge safely, he is going down through the chamber and going to use red locktight to make it permanit is this ok, pretty sure he would not risk his livly hood.

Crappiepro

#1
March 13, 2014, 07:36:54 PM
It's fine if it's gonna be perminant.
You need to heat that area up to break it loose if ever decide to do so. This will save you from stripping out the screw heads.

jerf

#2
March 13, 2014, 08:56:24 PM
Thanks for your reply, really like this gun. Has changable chokes and is mossyoak original bottomland.

jerf

#3
March 13, 2014, 08:57:35 PM
Getting a bushnell trs-25 put on it.

jerf

#4
March 13, 2014, 10:49:38 PM
No one else has any advice?

SumToy

#5
March 14, 2014, 01:08:06 AM
I would ask him to try not to into the chamber.  I have seen it cut holes in the shell before.  Now if he lets the screw go into and sands it flus with the inside of the chamber you should be fine. 
Tell us just how dead do you want them to be and we will see if we can get that for you.
Building American made products with American made CNC's and Steel.  Keep all the service Men and Women that gave a LIFE for our FREEDOM a live when you buy American.  God Bless the USA

jerf

#6
March 14, 2014, 01:48:25 PM
He said he would file them flush.

jerf

#7
March 21, 2014, 10:53:59 PM
 :D Got my gun back today and could not be happier, Gunsmith did a great job.
Print
Go Up Pages1
User actions