I have a 1950's model Stevens 94B single shot that i'm going to set-up for my son to use this season.
It is a 12 ga. chambered 2 3/4" only and it has no markings on the barrel at all except for a small stamping on the left side that says "proof tested steel."
The exit dia. of the muzzle mics out at .690. I have no way to mic. the inside of the barrel ahead of the chamber.
Assuming it's .729, that's a reduction of over .35 and that technically would make this barrel a full choke barrel.
Am I correct ?
Any advice on a load for shots 30 yds. and under ? Been looking at the 2 3/4 Hevi 6's, but have no experience with non-interchangeable choke barrels this old........