Fiber optics on raised barrell

[savduck]

Anybody have secrets for mounting adjustable fiber optics on the raised ribs like the benellis or stoegers. Ive had both and cant ever get them were I can adjust the sights dead on, they always seem to shoot low. Put the same sights on my beretta or remington and they are dead on. I have a red dot on my stoeger but sure would like to go back to the fiber optics.

[Skeeterbait]

Have you tried moving the rear sight mounting position along the rib?  Changing its location on the rib can effect your POI.

[savduck]

Yep as far back as it can go and about as far forward as they can go. Left/right is fine.

Had same results with Benelli black eagle as the stoeger. Need about 8 inch more adjustment to be spot on.

[Skeeterbait]

OK, so you are shooting low.  You need to lower your front site or raise your back sight.  I don't know which brand of sights you are using and I know this means more money, but is there another brand or model of sight that would give you a lower front so you could use the front from one kit and the adjustable rear you have?  It is that or look for a way to shim the back sight if possible.

[savduck]

Been looking for after market ghost rings, cant find any for benellis.

[TrophyTracker]

I had the same problem once, and fixed it by putting the factory front Fiber optic bead on the M2 and the Adjustable rear sight from a SVL Dead Center combo on the back. I took me from shooting extremely low to being right where I wanted to be.