What can I expect? SBE2, Sumtoy .660, Longbeard 5's or 6's?

[jb1069]

I am looking for input on this combination. I an setting up a SBE2. I have always had good patterns in the past using Longbeard xr's with a carlson tube. With this gun I would like to set it up the best I can and I am just wandering what type of patterns I can expect to get using a Sumtoy .660 with the longbeards. I know every gun is different and I will put the time in to find the right set up. Just looking for opinions or past experience. Any help would be appreciated.

[lowoctane]

Did you order it from William? If so he should be able to give you an idea. Best to just shoot it!

[jb1069]

I have not ordered it yet. I have tried to get information from William but I am guessing he is busy. The information I am getting is vague at best.

[Tom007]

He always replies on here most of the time. Send him a PM. He will get with you...good luck.

[jb1069]

Thank you

[SumToy]

IF YOU CALLED IN THEY TOLD YOU THE SIZE YOU NEEDED.   IT WILL BE A 40 YARD GUN.

[Gobbler428]

I use a Jebs 655 in my SBE 2 and get a great pattern. I would think a 660 would be good as well, depending on the gun  You never know until you shoot um.

[StickString96]

I use a Jebs 655 in my SBE 2 and get a great pattern. I would think a 660 would be good as well, depending on the gun  You never know until you shoot um.

I run a Jebs 655 in my SBE3 and get great patterns with TSS and LBs.


Sent from my iPhone using Tapatalk

[tnanh]

William recommended a .665 for 5 and 6 Longbeards for me but that was for a single shot he did work on for me and tapped for rem-choke. 3 inch longbeard magnum 6's put 205 in a ten inch circle for me so he was right and I have been very happy with this choke.

[jb1069]

Thanks for the input guys!

[mossyoak79]

I hunt with a SBE2 and get amazing patterns with LBXR #5 in both a jebs 655 and a Kicks GT 660. The jebs is just a bit tighter but very even hunting patterns. Killed birds to 60yds with the jebs 655

[ragin-cajun]

my SBE2 shot #6s great (290/320 @ 10 inch circle 40 y) with the CarlsonXR .665 or the IC .665

[Tom007]

Can't argue those results...